Bedienungsanleitung Haas-Sohn BELAQUA (Seite 2 von 6) (Englisch)

564797

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

List of contents

1. Description 2

2. General information,

safety information 2

3. Data for calculating the chimney

dimensions according to

DIN 4705 Part 2 3

4. Installation and connection

of the multi-fuel stove 3

4.1. Safe distances (minimum distances): 3

4.2. Connection to the chimney 3

4.3 Connection to the heating system 4

5. Operating the multi-fuel stove 4

5.1. Suitable fuels 4

5.2. Installation of the combustion

air regulator 4

5.3. Using your multi-fuel stove

for the first time 4

5.4. Lighting the multi-fuel

stove and heating it 5

5.5. Adding fuel 5

5.6. Operating methods in

the transition period 5

5.7. Emptying the ash 5

5.8. Limiting emissions 5

5.9. Cleaning and maintenance 5

5.10. Trouble-shooting 6

6. Guarantee 6

6.1. General 6

6.2. Warranty guidelines 6

6.3. Complaints 6

7. Information concerning the ordering

of replacement parts 6

Congratulations! You are the owner of a HAAS + SOHN

multi-fuel stove, a quality product. Please read the operating

instructions carefully. You will find information about how

to use and operate this stove which will enable you to

increase the practical value of the device and extend its

working life. In addition you can save fuel by burning it

correctly and protect the environment. The accompanying

information sheet for the device is a part of these operating

instructions.

We can only provide a guarantee when the following

instructions for the installation and use of your stove are

complied with. Keep these instructions and the device

information sheet in a safe place, so that you can

refamiliarise yourself with the correct operation of your

stove at the start of each heating period.

1. Description

Multi-fuel stoves, which allow water to circulate through

them, are suitable for connection to the sealed central

heating system already present and for the heating of living

rooms and workspaces.

The body of the stove consists of a welded steel

construction. Underneath there is a wood storage shelf.

Above this is there is the ash pan. On top of this there is the

combustion chamber and on top of that the heat exchanger.

The flue for the exhaust gases is placed between the heat

exchanger and the back wall of the inner stove.

Heating of the air in the room and the creation of a

comfortable climate to live in is actually achieved by

convected heat. In this way even rooms which have been

cool for a long period of time can be heated quickly. Air

from the room enters the stove via the wood storage shelf,

becomes heated in the convection duct between the inner

body and the outer wall and flows out again through the

openings on top of the stove. The proportion, which is

radiated heat, is produced by heat radiation from the

transparent window in the combustion chamber door, from

the metal surfaces of the stove and – if they are present –

from the ceramic surfaces on the side walls.

2. General information, safety information

National and European standards, local regulations, planning

and building regulations and fire safety regulations are to be

complied with. When installing your stove you must observe

the fire prevention regulations, the regional planning and

building regulations and also hold a meeting with the

appropriate master chimney sweep in the area. He will also

test to see if the connection of the device to the chimney

complies with regulations.

Before you install your multi-fuel stove check if the load

bearing capacity of the sub-structure can support it. If the

load bearing capacity is insufficient suitable measures must

be taken in order to achieve this (e.g. a plate to the spread

the load).

!The room in which you install the stove must be

protected against frost and well ventilated!

All tests prescribed by the legal authorities must be carried

out on your multi-fuel stove. The required values for

combustion efficiency and the exhaust gas emissions must be

complied with.

Your multi-fuel stove of type BA 1 is tested according to

EN13240 ‘Room heaters fired by solid fuel’. Multi-fuel

stoves of type 1 (see appliance specification plate) may not

be connected to a multiply-occupied chimney unless the

chimney measurements allow this according to DIN 4705

part 2.

The multi-fuel stove is designed to burn fuels slowly.

Classification as type 1 is achieved by self-closing

combustion chamber doors. The springs that close the doors

may not be removed when any such device is connected to a

multiply occupied chimney. The combustion chamber doors

may only be opened when adding fuel and when removing

the ash. Otherwise they must remain shut, even if the stove is

not being used, in order to avoid affecting other fireplaces

and to avoids the dangers associated with this.

Sufficient supply of fresh air to the room in which it is sited

must be ensured. Windows and doors to the room in which it

is sited should not be closed so tightly that they prevent the

supply of the air necessary for combustion. The minimum

amount of air must be able to flow to your stove without

being prevented by the operation of air extraction devices

(e.g. extractor fans in the bathrooms and kitchen etc.) in your

home or any other dwellings which may be connected to it.

Haas-Sohn BELAQUA Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Haas-Sohn BELAQUA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info