Bedienungsanleitung Haas-Sohn COMPACT-PELLET 310 (Seite 10 von 40) (Englisch)

812036

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Press the left key on the control unit until the

information page appears.

Press right key (menu), then with the two

middle keys, set the cursor to Mode – press

right key (select) – with the two middle keys,

set the cursor to Mode „OFF“ – press right

key (Save).

The stove initiates the operating state Cooling

and can no longer start the heating operation

automatically, not even with undershooting of

the set room temperature.

During the operating state OFF, the control

unit and parts of the controller continue to be

supplied with power (approx. 9 Watt per

hour).

5.10. Power failure

The control unit has a buffer battery, so that

the data are retained during the power failure.

Differentiation is made between a short-term

and a long-term power failure.

Short-term power failure – duration of the

power failure shorter than 30 seconds:

After the power supply is returned, the stove

resumes its operation from that point in which

it was before the power failure.

Long-term power failure – duration of the

power failure longer than 30 seconds

After the power supply is returned, the stove

switches to the operating state Safety

Shutdown.

With a power failure, a small quantity of flue

gas can possibly escape.

5.11. Overheating

If the maximum permissible waste-gas

temperature is exceeded, then a safety

shutdown is initiated and the following error

message appears on the display:

„Shutdown waste-gas temperature heating

operation too high“

The stove can only resume its heating

operation when the error message on the

control unit has been acknowledged and the

required operating mode has been set again.

5.12. Low-temperature shutdown

If, during the operating state Heating, the

stove cools below a minimum temperature,

then a safety shutdown is initiated and the

following error message is indicated on the

display:

„Shutdown waste-gas temperature heating

operation too low“

The stove can only resume its heating

operation when the error message on the

control unit has been acknowledged and the

required operating mode has been set again.

6. Description of keys on the control unit

6.1. Control unit

As shown in the picture, the display is divided

into five areas.

The page label contains the name of the

respective page in which the operator is

presently in. In the same row, the page

number is indicated right-aligned.

In the menu- / Info area, there are four rows

each with 21 characters available for the text

display.

In the information pages, the operator

switches between the individual information

pages with the keys 2 and 3.

If the operator is in the selection menu, then

at the same time he is shown 4 submenu

items. With the keys 2 and 3, he can select

between the individual menu items, whereby

the menu item currently selected is

highlighted with a black bar. If after the

selection of the 4th menu item, the key 3 is

Page label Page No.

Description

Left key Description

Right key

Description

Middle keys

1 2

Mode Heating

Operating state Standby

Room taget/actual 20/20°C

Time Date

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Haas-Sohn COMPACT-PELLET 310 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Haas-Sohn COMPACT-PELLET 310

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info