812036

Haas-Sohn COMPACT-PELLET 310 Seite 16

16
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
16
¾ In the second column the switch-ON times
(identified with the letter E) are
programmed with the two middle keys in
15 minute steps.
¾ With the right key (arrow), one can switch
columns from left to right.
¾ In the third column the switch-OFF times
(identified with the letter A) are
programmed with the two middle keys in
15 minute steps.
¾ In the fourth column, that period which lies
between the respective ON- and OFF time
is assigned the required target room
temperature.
¾ After the complete programming of the
weekday, by pressing the left key (Back),
the programming window for this weekday
can be saved and exited.
¾ The other days must also be programmed
in the same manner.
7.3.3.4 Programming example for the weekday
„Monday“
¾ Continue to press the left key until the
information page appears.
¾ Then press the lower middle key.
¾ Now that page appears, in which the
weekdays can be selected.
¾ With the two middle keys, move the cursor
so that the field Mo (Mo – means Monday)
is underlined with the cursor.
¾ Then press the right key (change).
¾ Now the programming window for the
weekday „Monday“ opens.
¾ In the first column are the position
numbers 1, 2 and 3
¾ In the second column the switch-ON times
(identified with the letter E) are
programmed with the two middle keys in
15-minute steps.
¾ With the right key (arrow), one can switch
columns from left to right.
¾ In the third column the switch-OFF times
(identified with the letter A) are
programmed with the two middle keys in
15-minute steps.
¾ In the fourth column, that period which lies
between the respective ON- and OFF time
is assigned the required target room
temperature.
¾ After the complete programming of the
weekday, by pressing the left key (Back),
the programming window for this weekday
can be saved and exited.
8. Cleaning and maintenance work
Due to the accumulation of ash resulting from the
burning of wood pellets, constant recurring
cleaning- and maintenance work is to be carried
out. With this as trouble-free an operation as
possible is effected.
As soon as you detect ash- and slag deposits in
the cold burner pot, this must be cleaned. See
operating instructions! If this is not done, the
slag will develop more and more. As a result, the
device can no longer ignite correctly. Pellets can
stack up in the burner pot. In extreme cases, this
can then extend back into the pellet chute. One
possible consequence would be a fire burning
back into the pellet container and a smoldering
fire in the pellet tank.
We therefore recommend to also inspect and
clean the cleaning opening below (see Pic.
10a+c) at the latest after 1000 kg of pellets.
Attention!
Devices that are not serviced in accordance
with our instructions may not be operated.
With non-observance all warranty claims
expire.
This destroys your device and is not covered
by the warranty.
Attention!
Before beginning cleaning work, the stove
must have cooled down, the ON/OFF-toggle
switch must be in the position "0" as well as
the mains cable unplugged!
On completion of the cleaning work, the
proper operating condition of the device must
be restored: Insert burner pot correctly, close
furnace door.
8.1 Cleaning the top surface
Dirt on the top surface of the stove can be
cleaned with water or if necessary with a mild
soap solution. You are advised against using
aggressive cleaning agents or solvents, since
these can lead to damage to the top surface.
8.2 Cleaning the glass panel
To clean the inspection panel, first the furnace
door must be opened. Impurities on the glass
panel can be removed with a glass cleaner or with
a moist sponge, on which you put available wood
ash (environmentally friendly).
The cleaning of the glass panel may only be
carried out with the stove cooled down and in the
operating state OFF.
8.3 Cleaning the burner pot
During operation, deposits can form in the burner
pot. How fast the burner pot becomes soiled is
dependent solely on the quality of the fuel. The
deposits or incrustations must be removed from
time to time.
… 16 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Haas-Sohn COMPACT-PELLET 310 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Haas-Sohn COMPACT-PELLET 310

Haas-Sohn COMPACT-PELLET 310 Bedienungsanleitung - Deutsch - 43 seiten

Haas-Sohn COMPACT-PELLET 310 Bedienungsanleitung - Französisch - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info