Bedienungsanleitung Haas-Sohn NIVALA (Seite 2 von 13) (Englisch)

564841

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

10. 1. Accessories supplied with the fireplace stove ....................................................19

10. 2. Special accessories (on order)...........................................................................19

10. 3. Recommended spare parts................................................................................19

10. 4. Package and waste disposal..............................................................................20

10. 5. ES Declaration of Conformity and CE Certificate...............................................20

10. 6. HAAS+SOHN Rukov s.r.o Products and Manufacturing Programme................20

10. 7. Caution!.............................................................................................................21

11. SUPPLEMENTS ...............................................................................................21-25

Congratulations! You have just bought the fireplace stove HAAS + SOHN, a top-quality

product. Thank you very much for your interest and purchase. Kindly read the Operating

Instructions to find out comprehensive information about the function, correct use and

handling. We recommend you to read the instructions carefully in order to avoid any risk

related to likely damage. Proper operation and maintenance affects the service life of the

product as well. In addition, proper operation and fuel supply is connected with fuel savings

and environment protection. Technical specifications are included in the manual.

The manufacturer provides guarantee providing you adhere to the directions and

recommendations in the instructions for operation and maintenance. Keep the operating

instructions and technical card safe to be able to refresh your knowledge at the beginning

of the new heating season.

1. TECHNICAL SPECIFICATIONS

The combined fireplace stove with the warm water exchanger is designed for heating in

habitable rooms, recreational buildings, work stations and other places to provide thermal

comfort, while the visual effect – the perception connected with flame – is similar to the

sensation of live fire. The warm water distribution system may be open or closed, made

with an auxiliary circulating pump or without the pump. The warm water distribution system

may be completed with e.g. service water heater. A good solution may be an integration of

the fireplace stove to the already built heating system with a gas boiler (electric boiler, or

other heating systems). In order to provide safety operation of the fireplace stove and

automatic back-up for the function of the circulating pump in case of electric power failure, it

is recommended to use a back-up power supply (See Supplement 3).

1.1. Heating concept

The fireplace stove is designed for burning wood, eco-fuel cakes and coal cakes (specific

types only) in a burning-through way, characteristic with very good firing conditions.

By means of the warm water exchanger, the fireplace stove hands some 50% of the heat

output in the central heating circuit or floor heating. The rest of the available heat is used

for heating of the air in the room where the fireplace stove is installed.

The air within the room is heated thus the thermal comfort is provided by heat convection,

in part by heat radiation as well. This way, you can heat up even very cold, long-time

unheated rooms very quickly. The concept of heating by means of heat convection is based

on the fact that the air in the room enters the fireplace stove at its bottom part, being heated

in the course of its way up inside the convection space consisting of a double shell of the

heating device. The air then flows through the holes in the upper part of the fireplace stove

back in the room. The radiation heat is generated by means of surface areas of the

fireplace stove (metal, ceramics, glass). Due to the construction, the biggest radiation heat

source is the glass door.

1.2. Construction design

The fireplace stove is welded of steel profiles, thickness 2-5 mm. In the middle of the

fireplace stove, there is a firing chamber that may be closed with a stocking door (equipped

with a self-acting element). The door is provided with special a large-area glass sheet,

thermal resistance up to 800 °C.

The inner space of the firing chamber is usually lined with fireclay brick shapes. The bricks

are not jointed with any filler (the reason is a protection of the bricks against damage by

thermic dilatation). The upper part of the firing chamber is equipped with partitions

designed for directing flue gases into a smoke outlet. The partitions may be fixed or

movable. Such movable partition may serve as a supporting holder for fireclay bricks. At

the bottom part of the firing chamber, a simple, fixed cast grate is installed. Before the

4 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Haas-Sohn NIVALA Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Haas-Sohn NIVALA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info