659872
19
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
19
Technical Details
Disposal
The device and filter may
contain infectious material
such as residual sanding
dust or skin particles. Therefore
please bear in mind the following
disposal instructions.
Disposing of the device
Old devices bought in Germany that
correspond to the electronic device
law should be sent directly to the
manufacturer (hadewe). We will
dispose of the device free of
charge. The devices should not be
taken to public disposal plants
(WEEE Reg.Nr DE20392713, b2b
device). For disposal of this unit out
of Germany, please contact the site
where you bought this hadewe
product.
Note for the disposal of the device/
treatment system:
Wear protecting gloves of the class
2 in accordance with DIN 374-2
during the disassembling of the
device. Also, wear a protective
mask for your face according EN
14683 version IIR or EN 149 FFP2.
Disposal of dust filter and coarse
dust filter
The filter bag and the coarse dust
filter are considered low contami-
nated waste. Dispose those in in
transparent, liquid- tight, resistant
plastics sacks and to not dispose
them compressed in the regular
household garbage.
Compulsory registration
Operators, distributors and retailers
who were informed about the
occurrences regarding §29 of
the Medical Devices law must
report this. The method of re-
porting is detailed in the Medical
Devices Safety Plan Ordinance.
Outside of Germany the corre-
sponding local conditions apply
Safety Check
A safety check must be done in
compliance with the regulations of
the country where the device is
used. The inspection interval is
once a year.
Repeated control and control after
repair (DIN EN 62535, VDE 0751-1)
Inspection interval for repeated
control: 1 year
Technical Information:
Safety class: II
Application: Type B (separate
measuring of discharge current not
necessary)
Power connection: NPS (non-
detachable power connection)
The protective ground conductor is
not connected to touchable conduc-
tive parts.
Necessary function inspection:
speed, display, on/off, suc-
tion/spray, clamping system.
Inspection before use
During the production control the
following inspections as per DIN EN
62353 (VDE 0751-1) are conducted
among others:
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hadewe Helius R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info