Bedienungsanleitung Haier AFE635C (Seite 7 von 56) (Holländisch)

710927

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Remaining battery capacity indication

Battery indicator status

Remaining battery

capacity

: On : Off : Blinking

50% – 100%

20% – 50%

0% – 20%

Charge the battery

015527

Switch action (Fig. 3 & 4)

CAUTION:

• Before inserting the battery cartridge into the tool,

always check to see that the switch trigger actuates

properly and returns to the “OFF” position when

released.

To start the tool, simply pull the switch trigger. Tool speed

is increased by increasing pressure on the switch trigger.

Release the switch trigger to stop.

For continuous operation, pull the switch trigger, push

in the lock button and then release the switch trigger.

To stop the tool from the locked position, pull the switch

trigger fully, then release it.

Speed change (Fig. 5)

The maximum air volume can be adjusted just by turning

the adjusting dial. This can be done even while the tool

is running. The dial is marked 1 (lowest) to 6 (highest).

NOTICE:

• The speed adjusting dial can be turned only as far as 6

and back to 1. Do not force it past 6 or 1, or the speed

adjusting function may no longer work.

When working in a high temperature circumstance, the

tool may be stopped because of the overheat protection

system. In that case let the tool cool down. Avoid setting

to speed 6 (highest) in high temperature circumstances.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before carrying out any

work on the tool.

Installing the long nozzle (Fig. 6 & 7)

To install the long nozzle:

1. Align the small projection of the housing with the

groove of the long nozzle.

2. Slide in the long nozzle, and turn it clockwise until the

triangle markings on the long nozzle and the housing

meet each other.

The length of the nozzle can be adjusted by changing the

locking position.

Installing the shoulder strap (optional accessory)

(Fig. 8)

Hook the shoulder strap onto the hanger of the tool.

Before use, adjust the length of strap so that it is easy

to work with it.

OPERATION

Blowing (Fig. 9)

CAUTION:

• Do not place the blower on the ground while it is

switched on. Sand or dust may enter from suction inlet,

and they may result in personal injury.

Hold the blower rmly with a hand and perform the

blowing operation by moving it around slowly.

When blowing around a building, a big stone or a

vehicle, direct the nozzle away from them.

When performing an operation in corner, start from the

corner and then move to wide area.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before attempting to

perform inspection or maintenance.

• Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may result.

Cleaning (Fig. 10)

From time to time, wipe off the outside of the tool using a

cloth dampened in soapy water.

To maintain product SAFETY and RELIABILITY,

repairs, any other maintenance or adjustment should be

performed by Makita Authorized Service Centers, always

using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specied in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Makita genuine battery and charger

• Shoulder belt

NOTE:

• Some items in the list may be included in the tool

package as standard accessories. They may differ from

country to country.

ENG108-1

Noise

The typical A-weighted noise level determined according

to EN50636:

Sound pressure level (L

): 79.1 dB (A)

Uncertainty (K): 1.8 dB (A)

Sound power level (L

): 93.5 dB (A)

Uncertainty (K): 2.3 dB (A)

Wear ear protection

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Haier AFE635C Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Haier AFE635C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info