Bedienungsanleitung Haier Dawn (Seite 8 von 233) (Englisch)

771631

Zoom out

Zoom in

Vorherige Seite

1/233

Nächste Seite

and outlet grills of the air conditioner are opened, and

the unit goes on working under the condition before the

grille will close automatically.

Notice:

Cannot pull direct the outlet grille by hand. Otherwise, the

grille will run incorrectly. If the grille is not run correctly,

stop for a minute and then start, adjusting by remote

controller.

Remote controller can memorize each operation status.

when starting it next time, just press ON/OFF button and

unit will run in previous status.

The setting of

function

The cancel of

function

Operation

HEALTH AIRFLOW OperationECOPILOT Operation

appears on the display. Avoid

the body.

again, appears on the display.

direct to the body.

Note:

2. In heating, it is better to select the mode.

3. In cooling, it is better to select the mode.

4. In cooling and dry, using the air conditioner for a

long time under the high air humidity, a phenomenon

falling drips of water occurs at the outlet grille.

5. Select the appropriate fan direction according to the

actual conditions.

TIMER

Human Sensing Function

1. “Follow” function: It can detect where a person is and

adjust the swing flap accordingly and send air to the

location of this person. If it detects people in two

locations, the swing flap will blow alternatively between

these two locations and stay at each location for 15s. If

the appliance detects people in three or more locations,

the left and right swing flaps will swing automatically.

“Avoid” function: When the appliance detects a person in

a location, it will adjust the swing flap to avoid such a

location. If it detects people in three or more locations,

the left and right swing flaps will swing automatically.

Note:

1) When there are people in several locations or a

person frequently moves between several locations,if this

person is in the in-between location or the crossing

location, whether the appliance is in a “Follow” mode or

an“Avoid” mode, theswing flap will swing automatically to

send air to these locations.

2) Whether the setting is “Follow” or “Avoid”, it takes some

time to adjust theair direction after the appliance identifies

the location of the people and the air direction will not

change immediately.

3) If the actual airflow cannot reach (or avoid) the location

where a person is due to such factors as fan speed setting,

temperature setting, ambient temperature difference and

layout of the room, pressing the left and right swing flaps

can adjustthe air direction and set the airflow direction by

hand.

4) Set the health airflow when the human sensing

(including follow/avoid) function is enabled and exit from

the human sensing (including follow/avoid) function.

5) Press the upper and lower swing flaps when the human

sensing (including follow/avoid) function is enabled, there

is no upper and lower full swing status.

6) When the appliance is in the upper and lower full swing

status, set the human sensing function (including

follow/avoid), the upper and lower swing flaps are in their

standard positions of relevant mode.

2. When the human sensing function is enabled, if the

appliance cannot detects people for a long time (at least

20 minutes), it will automatically enter the power saving

mode. In the power saving mode, the operating frequency

will lower down and the fan speed is low. Once a person is

detected, the appliance will exit from the power saving mode.

3. When the human sensing function is enabled, the

appliance will have a real-time detection of human

movements and adjust the frequency and fan speed

according to the movements. In the heating mode, if the

movements are frequent, the frequency and fan speed will

lower down; when the movements become less, the

frequency and fan speed will rise but cannot exceed the

setting values set by the remote controller. The cooling

mode is contrary to the heating mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Haier Dawn Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info