Bedienungsanleitung Haier Jade Supermatch (Seite 16 von 23) (Englisch)

771629

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Operation

Steri Clean Operation

◆Functional description:

the purpose of this function is to clean the evaporator.

◆Entry and exit：

If this function is needed, please select in the hOn APP.

◆Note:

SELF-CLEAN Operation

When the 56℃ Steri-clean function is required,

please access in the hOn APP.

Introduction to Steri Clean

Attention:

1.The function lasts 60-80 minutes.

2.Hot air may come out during the process when evaporator

is heated to 56℃ or maintains at 56℃ in summer.

3.This function may cause changes in room air temperature

in winter.

4.When outdoor ambient temperature is above 36℃, the

function cannot be performed. Instead, Self Clean function

will be turned on and lasts 21mins when Steri Clean is

turned on.

Stage 1 - Self Clean: to remove dirt away this function

freezes the evaporator with moisture in the air, and

removes dirt during the melting process.The hydrophilic

aluminium coating with smaller angel (ɑ≈5°） helps

increase water drainage efficiency.)

Stage 2 - 56℃ high temperature sterilisation: It utilizes

smart temperature monitoring and frequency control

technology to adjust the compressor operation, so that we

maintain the evaporator temperature at high temperature

for over 30mins to kill any bacteria and virus inside the air

conditioner.

Stage 3 - Rapid evaporator cooling to enhance the

sterilisation performance. The foil surface is coated with

silver nano-particles which has an anti-bacterial efficiency

up to 99%.

Press SELF CLEAN button to enter this function. The

display will show "CL" on the panel of the indoor unit and

on the remote controller. Maximum running time in this

function is no more than 21 minutes. This function will exit

automatically with the " Pi " sound twice, then the unit

return to original state.During SELF CLEAN operation,

pressing the button repeatedly will not exit the process.

Press the“power” button to exit this mode.

1.This function is invalid in timer / sleep mode.

,ecuder yam emulov ria eht ,strats edom siht retfA .2

have no airflow, or even cold airflow blowing.

ria eht nehw dnuos emos ekam tinu eht fi lamron si tI .3

expands with heat and contract with cold.

4. The “CL” display time may last dif ferently on the

remote controller and panel.

rorre ,orez woleb si erutarepmet tneibma edistuo eht fI .5

gninaelc-fles gnirud pu wohs eb yam“ 52F“ edoc

operation,which is normal protection, please turn of f the

power and restart after 10 seconds .

eht nehw si ,edom siht nur ot noitidnoc tseb ehT .6

temperature is 20℃~27℃ and the humidity is 35％06~

％ indoors, the temperature is 25℃~38℃（ gnilooc

season）outdoors.

7.It is hard for the air to frost if the air is too dry

(humidity＜20%). and if the humidity is too high

(humidity＞70%) the condensate water may increase.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Haier Jade Supermatch Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info