Bedienungsanleitung Haier Pearl serie (Seite 7 von 180) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

771616

Zoom out

Zoom in

Vorherige Seite

1/180

Nächste Seite

Operation

Steri Clean Operation

◆Functional description:

the purpose of this function is to clean the evaporator.

◆Entry and exit：

If this function is needed, please select in the hOn APP.

◆Note:

SELF-CLEAN Operation

HEALTH Operation

(This function is unavailable on some models.)

Press HEALTH button , the remote controller will show

and the Health function will start.

Press the HEALTH button again and the health function will be

cancelled.

When the 56℃ Steri-clean function is required,

please access in the hOn APP.

Introduction to Steri Clean

Attention:

1.The function lasts 60-80 minutes.

2.Hot air may come out during the process when evaporator

is heated to 56℃ or maintains at 56℃ in summer.

3.This function may cause changes in room air temperature

in winter.

4.When outdoor ambient temperature is above 36℃, the

function cannot be performed. Instead, Self Clean function

will be turned on and lasts 21mins when Steri Clean is

turned on.

Attention：

UV sterilization function: it uses the c-band with the most

effective sterilization effect in ultraviolet radiation to remove

harmful micro-organisms such as bacteria in the air, which has

remarkable effects to make the air healthy.

1. It is recommended to turn on the UV sterilization function for

1-2 hours in one day, longer time will affect the life of the UV

lamp.

2.Do not look directly at the UV lamp or touch it with your hand

when the sterilizing function is on. Please turn off the sterilizing

function before opening the panel.

3.Tinged blue light may appear near the air conditioning inlet

when the sterilizing function is on.

4.Only when the internal fan starts and health function turned

on, the UV lamp will be lighted.

Stage 1 - Self Clean: to remove dirt away this function

freezes the evaporator with moisture in the air, and

removes dirt during the melting process.The hydrophilic

aluminium coating with smaller angel (ɑ≈5°） helps

increase water drainage efficiency.)

Stage 2 - 56℃ high temperature sterilisation: It utilizes

smart temperature monitoring and frequency control

technology to adjust the compressor operation, so that we

maintain the evaporator temperature at high temperature

for over 30mins to kill any bacteria and virus inside the air

conditioner.

Stage 3 - Rapid evaporator cooling to enhance the

sterilisation performance. The foil surface is coated with

silver nano-particles which has an anti-bacterial efficiency

up to 99%.

Press SELF CLEAN button to enter this function. The

display will show "CL" on the panel of the indoor unit and

on the remote controller. Maximum running time in this

function is no more than 21 minutes. This function will exit

automatically with the " Pi " sound twice, then the unit

return to original state.During SELF CLEAN operation,

pressing the button repeatedly will not exit the process.

Press the“power” button to exit this mode.

1.This function is invalid in timer / sleep mode.

2.After this mode starts, the air volume may reduce,

have no airflow, or even cold airflow blowing.

3.It is normal if the unit make some sound when the air

expands with heat and contract with cold.

4. The “CL” display time may last differently on the

remote controller and panel.

5.If the outside ambient temperature is below zero, error

code “F25 “may be show up during self-cleaning

operation,which is normal protection, please turn off the

power and restart after 10 seconds .

6.The best condition to run this mode, is when the

temperature is 20℃~27℃ and the humidity is 35％~60

％ indoors, the temperature is 25℃~38℃（cooling

season）outdoors.

7.It is hard for the air to frost if the air is too dry

(humidity＜20%). and if the humidity is too high

(humidity＞70%) the condensate water may increase.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Haier Pearl serie Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Haier Pearl serie

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info