Bedienungsanleitung Haier Zun Tower (Seite 9 von 27) (Englisch)

771626

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

Safety Principles

• During product maintenance, favorable ventilation shall be guaranteed at the maintenance site, and the close

of all the doors/windows is not allowed.

• Operation with open fire is not allowed, including welding and smoking. The use of phones is also not

allowed. The user shall be informed that cooking with open fire is not allowed.

• During maintenance in a dry season, when the relative humidity is less than 40%, anti-static measures shall

be taken, including the wearing of cotton clothes and cotton gloves.

• In case the leakage of flammable refrigerant is identified during maintenance, forced ventilation measures

shall be taken immediately, and the source of leak shall be plugged.

• In case the product damaged must be maintained by disassembling the refrigeration system, the product

must be delivered to the maintenance point. Welding of refrigerant pipelines at the user’s site is not allowed.

• During maintenance, in case re-treatment is required due to lack of fittings, the air conditioner shall be reset.

• The refrigeration system must be safely earthed in the whole course of maintenance.

• For the door-to-door service with refrigerant cylinders, the refrigerant charged inside the cylinder cannot

exceed the specified value. The cylinder placed in vehicles or at the installation/maintenance site shall be fixed

perpendicularly and be kept away from heat sources, ignition source, source of radiation and electric appliance.

Maintenance Items

Maintenance Requirements

• Before the refrigeration system is operated, the circulating system shall be cleaned with nitrogen. Afterwards,

the outdoor unit shall be vacuumized, the duration of which cannot be less than 30 minutes. Finally, 1.5~2.0MPa

OFN shall be used for nitrogen flushing (30 seconds~1 minute), to confirm the position requiring treatment.

Maintenance of the refrigeration system is only allowed after the residual gas of flammable refrigerant is removed.

• During the use of refrigerant charging tools, cross contamination of different refrigerants shall be avoided.

The total length (including the refrigerant pipelines) shall be shortened as much as possible, to reduce the residual

of refrigerant inside.

• The cylinders of refrigerant shall be kept upright, and be fixed.

• Before refrigerant charging, the refrigeration system shall be earthed.

• The refrigerant charged shall be of the type and volume specified on the nameplate. Excessive charging is

not allowed.

• After maintenance of the refrigeration system, the system shall be sealed with a safe manner.

• The maintenance in progress shall not damage or lower the original class of safety protection of the system.

Maintenance of Electrical Components

• Partial of the electrical component under maintenance shall be subject to inspection on refrigerant leakage

with dedicated leak detection equipment.

• After the maintenance, the components with safety protection functions cannot be disassembled or removed.

• During the maintenance of sealing elements, before opening the seal cover, the air conditioner shall be

powered off first. When power supply is required, continuous leak detection shall be carried out at the most

dangerous position, to avoid potential risks.

• During maintenance of electrical components, the replacement of enclosures shall not affect the level of

protection.

• After maintenance, it shall be guaranteed that the sealing functions will not be damaged or the sealing

materials will not lose the function of preventing the entry of flammable gas due to aging. The substitute

components shall meet the recommended requirements of the air conditioner manufacturer.

Maintenance of Intrinsically Safe Elements

The intrinsically safe element refers to the components working continuously inside flammable gas without any

risks.

• Before any maintenance, leak detection and inspection on earthing reliability of the air conditioner must be

carried out, to ensure no leakage and reliable earthing.

• In case the allowable voltage and current limit may be surpassed during the service of the air conditioner,

any inductance or capacitance cannot be added in the circuit.

• Only the elements appointed by the air conditioner manufacturer can be used as the parts and components

replaced, or otherwise a fire may be triggered in case of refrigerant leakage.

• For the maintenance not involved in system pipelines, the system pipelines shall be well protected, to ensure

that no leakage will be caused due to maintenance.

• After maintenance and before test run, the air conditioner must be subject to leak detection and inspection on

earthing reliability with leak detection equipment or leak detecting solution. It shall be guaranteed that the startup

inspection is carried out without leakage and under reliable earthing.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Haier Zun Tower Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info