683782

Hako Scrubmaster B140R Seite 20

20
Zoom out
Zoom in
Vorherige Seite
1/38
Nächste Seite
Actuate the following operation
elements of the Hakomatic
subsequently
Turn the key switch ON
Release parking brake (if locked)
Actuate (I/P) key which enables the
following functions:
– brush head lowers
– brushes rotate
– squeegee lowers
– suction turbine starts operation
– lye blocking valve opens
Turn On or OFF the lye supply by
the (I/N) key and reduce by the (-)
key or increase by the (+) key.
Actuate the drive pedal until the
desired speed is attained.
Note: After lowering the brush head,
move the Hakomatic immediately;
otherwise the brushes might leave
traces.
When work is finished:
Stop the machine
Lift up the brush head and the
squeegee by the (I/P) key (the suc-
tion turbine continues operation for
about 15 seconds)
Turn OFF the key switch
Actuate the parking brake
Drain the soiled water tank and
rinse
Clean the sealing strips of the
squeegee
Check the intake filter (III/7) and
clean if required
Note: Do not clean the machine by
means of vapor jet or high pressure
cleaning equipment but by means of a
water hose (pressure: approx. 5 to 6
bar) and from the top to the bottom.
Do not allow water to get into any
opening, slits, on electronic modules,
control panels or seals.
Do not allow water to get on the seat
console as it may be collected on the
battery stored below the seat, remove
water if required.
Let the machine dry e.g. for the
week-end. The use of aggressive and
caustic detergents is not allowed. We
recommend to clean the tanks at
regular intervals (e.g. once daily after
work has finished) in order to preclude
accumulation of organisms dangerous
to health.
52
Actuate the following operation
elements of the Hakomatic
subsequently
Turn the key switch ON
Release parking brake (if locked)
Actuate (I/P) key which enables the
following functions:
– brush head lowers
– brushes rotate
– squeegee lowers
– suction turbine starts operation
– lye blocking valve opens
Turn On or OFF the lye supply by
the (I/N) key and reduce by the (-)
key or increase by the (+) key.
Actuate the drive pedal until the
desired speed is attained.
Note: After lowering the brush head,
move the Hakomatic immediately;
otherwise the brushes might leave
traces.
When work is finished:
Stop the machine
Lift up the brush head and the
squeegee by the (I/P) key (the suc-
tion turbine continues operation for
about 15 seconds)
Turn OFF the key switch
Actuate the parking brake
Drain the soiled water tank and
rinse
Clean the sealing strips of the
squeegee
Check the intake filter (III/7) and
clean if required
Note: Do not clean the machine by
means of vapor jet or high pressure
cleaning equipment but by means of a
water hose (pressure: approx. 5 to 6
bar) and from the top to the bottom.
Do not allow water to get into any
opening, slits, on electronic modules,
control panels or seals.
Do not allow water to get on the seat
console as it may be collected on the
battery stored below the seat, remove
water if required.
Let the machine dry e.g. for the
week-end. The use of aggressive and
caustic detergents is not allowed. We
recommend to clean the tanks at
regular intervals (e.g. once daily after
work has finished) in order to preclude
accumulation of organisms dangerous
to health.
52
Actuate the following operation
elements of the Hakomatic
subsequently
Turn the key switch ON
Release parking brake (if locked)
Actuate (I/P) key which enables the
following functions:
– brush head lowers
– brushes rotate
– squeegee lowers
– suction turbine starts operation
– lye blocking valve opens
Turn On or OFF the lye supply by
the (I/N) key and reduce by the (-)
key or increase by the (+) key.
Actuate the drive pedal until the
desired speed is attained.
Note: After lowering the brush head,
move the Hakomatic immediately;
otherwise the brushes might leave
traces.
When work is finished:
Stop the machine
Lift up the brush head and the
squeegee by the (I/P) key (the suc-
tion turbine continues operation for
about 15 seconds)
Turn OFF the key switch
Actuate the parking brake
Drain the soiled water tank and
rinse
Clean the sealing strips of the
squeegee
Check the intake filter (III/7) and
clean if required
Note: Do not clean the machine by
means of vapor jet or high pressure
cleaning equipment but by means of a
water hose (pressure: approx. 5 to 6
bar) and from the top to the bottom.
Do not allow water to get into any
opening, slits, on electronic modules,
control panels or seals.
Do not allow water to get on the seat
console as it may be collected on the
battery stored below the seat, remove
water if required.
Let the machine dry e.g. for the
week-end. The use of aggressive and
caustic detergents is not allowed. We
recommend to clean the tanks at
regular intervals (e.g. once daily after
work has finished) in order to preclude
accumulation of organisms dangerous
to health.
52
Actuate the following operation
elements of the Hakomatic
subsequently
Turn the key switch ON
Release parking brake (if locked)
Actuate (I/P) key which enables the
following functions:
– brush head lowers
– brushes rotate
– squeegee lowers
– suction turbine starts operation
– lye blocking valve opens
Turn On or OFF the lye supply by
the (I/N) key and reduce by the (-)
key or increase by the (+) key.
Actuate the drive pedal until the
desired speed is attained.
Note: After lowering the brush head,
move the Hakomatic immediately;
otherwise the brushes might leave
traces.
When work is finished:
Stop the machine
Lift up the brush head and the
squeegee by the (I/P) key (the suc-
tion turbine continues operation for
about 15 seconds)
Turn OFF the key switch
Actuate the parking brake
Drain the soiled water tank and
rinse
Clean the sealing strips of the
squeegee
Check the intake filter (III/7) and
clean if required
Note: Do not clean the machine by
means of vapor jet or high pressure
cleaning equipment but by means of a
water hose (pressure: approx. 5 to 6
bar) and from the top to the bottom.
Do not allow water to get into any
opening, slits, on electronic modules,
control panels or seals.
Do not allow water to get on the seat
console as it may be collected on the
battery stored below the seat, remove
water if required.
Let the machine dry e.g. for the
week-end. The use of aggressive and
caustic detergents is not allowed. We
recommend to clean the tanks at
regular intervals (e.g. once daily after
work has finished) in order to preclude
accumulation of organisms dangerous
to health.
52
Scrubmaster
Scrubmaster immediately;
… 20 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hako Scrubmaster B140R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info