3
• As with all electrical products, this device should
be kept out of the reach of children.
• Do not bend or crush the cable.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualied experts.
• Do not incinerate the battery or the product.
• Do not tamper with or damage/heat/disassemble
the batteries/rechargeable batteries.
• The product must only be operated on a supply
network as described on the type plate.
Risk of electric shock
•Do not open the device or continue to operate it
if it becomes damaged.
•Do not use the product if the
AC adapter, the adapter cable or the mains
cable are damaged.
•Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualied experts.
4. Product characteristics
Our WiFi outdoor camera is used to monitor the area
in which you install it. You can use the Hama Smart
Home (Solution) app to access the images of the
monitored location conveniently at any time.
• The following voice commands are available for
voice assistants with a display (Amazon Echo
Show, Google Nest, etc.):"Alexa/OK Google, show
me camera (plus the name of the camera you
have dened)"
5. Installation
• You can mount the camera using the enclosed
mounting kit
Warning - mounting kit
• Do not mount the product above locations
where persons might sit or stand.
• Before mounting, check that the wall you
have chosen is suitable for the weight to be
mounted. Also make sure that there are no
electric, water, gas or other lines running
through the wall at the mounting site.
Warning
•When mounting outdoors, the enclosed rubber
hood must be pulled over the camera.
6. Commissioning
• The camera can be charged via the solar panel
supplied as well as via a mains adapter. To do
this, unlock the camera's housing lock at the
top, open the housing and insert the batteries
supplied.
6.1 Charging via power supply unit
Warning
•Only operate the product from an approved
socket that is connected to the public power
supply. The socket must be installed close to
the product and must be easily accessible.
•Disconnect the product from the power
supply using the On/Off switch – if this is
not available, unplug the power cord from
the socket.
•If using a multi-socket power strip, make
sure that the total power consumption of all
connected devices does not exceed the socket
strip's maximum throughput rating.
•If you will not be using the product for a
prolonged period, disconnect it from mains
power.
• For operation via USB, connect a micro-USB cable
(not included in the scope of delivery) with the
micro-USB socket on the camera and a suitable
USB power supply unit (not included in the scope
of delivery).
• Connect the power supply unit to a properly
installed socket. When doing so, consult the
operating instructions for the power supply unit.
