Bedienungsanleitung Hama 62727 - WLAN Modem Router ADSL2 plus (Seite 15 von 52) (Deutsch, Englisch, Holländisch, Französisch)

607695

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Package contents:

1x Hama Wireless LAN ADSL2+ Modem Router, 54 Mbps

1x 12 V power supply unit

1x Printed operating instructions

System requirements:

• Operating system with TCP/IP protocol installed

• Java-capable web browser such as Mozilla Firefox, Microsoft Internet Explorer or Opera.

Safety instructions:

Do not use the device in moist or extremely dusty areas, on radiators or in the vicinity of heat sources. This device

is not designed for use outdoors. Protect the device from pressure and impact. The device may not be opened or

moved during operation. Do not use the device without an antenna attached

Caution Use the router with the enclosed power supply unit only. Using other power supply units can cause

irreparable damage to the product.

Note: !! The “Connect On-Demand” setting is recommended if you have a pay-as-you-go tariff(if you pay

according to volume or time). This means that the Internet connection is disconnected automatically

after the period set in the “Idle time” option. Connection costs may be high if you are permanently

connected to the internet. Please also note that closing the browser does not automatically

disconnect you from the Internet. A number of programs send queries to the Internet or receive

data without this being clearly indicated. For the router, these queries are just as valid as opening

a browser, for example. If you want to ensure that there is no active connection to the Internet, you

should switch off the device.

Requirements for installing the HAMA WLAN ADSL2+ Modem Router, 54 Mbps:

Ensure that you have the following before installing the Hama WLAN ADSL2+ Modem Router:

1. ADSL or ADSL2+-enabled connection

2. Installed DSL splitter provided by your DSL connection service provider

3. User information from your Internet provider

4. DSL connecting cable (between the splitter and modem)

5. CAT5STP network cable with a RJ-45 connection

1 Connecting the WLAN ADSL2+ Modem Router:

1. Connect the computers and other network devices such as hubs/switches to sockets 1-4. Use a crossover

or CAT5 patch cable (max. 100 m). The integrated switch automatically detects the connection speed of 10 or

100 Mbps, half/full duplex transfer mode and the type of cable used.

2. Connect the DSL splitter to the “ADSL” connection on the rear of the WLAN ADSL2+ modem router using the

DSL connecting cable.

3. Plug the provided power supply unit into an empty socket and connect it to the router.

Caution: Unsuitable power supply units can cause damage.

Checking installation:

There are different LEDs for indicating the status on the top of the device:

LEDCondition Status

POWER IlluminatedPower supply unit is connected and supplying power

OffNo power unit connected, device not being supplied with power

WLAN device FlashingWireless LAN is activated / data is being sent

OffWireless LAN is deactivated

SYNC IlluminatedModem has successfully synchronised with the switching centre

Flashing Modem is attempting to synchronise with the switching centre

LAN 1-4IlluminatedThe corresponding LAN port has established a correct network connection

Flashing Data transfer via respective LAN port

OffNo connection

2 Conﬁguring the Operating System and Computer

The TCP/IP protocol must be installed on all PCs that will be using the Internet. By default, the IP address

192.168.2.1 and an activated DHCP server are conﬁgured for the router. This means that the connected PCs are

automatically allocated suitable addresses and other settings. We recommend that you keep these settings.

Proceed as follows to check the settings on your PC:

On your Windows Desktop click

Start -> Settings -> Control Panel -> Network

Connections

or, with Windows Vista,

Start (Windows logo) -> Control Panel -> Network and

Internet -> Network Connections

Select the connection type (network adapter) between

your PC and the router, e.g. “LAN connection”. When

you right-click the corresponding connection, a menu is

displayed; select Properties.

Select the Internet Protocol (TCP/IP) entry in the list

and then click Properties.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama 62727 - WLAN Modem Router ADSL2 plus Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info