Bedienungsanleitung Hama 62727 - WLAN Modem Router ADSL2 plus (Seite 18 von 52) (Deutsch, Englisch, Holländisch, Französisch)

607695

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

First select whether you want to use 64

bit or 128 bit encryption. The latter offers

greater security. Next, enter ox and your

Security key (you can use characters

ranging from 0-9 and a-f). The length of the

key is limited to 10 letters/numbers for the

64 bit encryption, and 26letters/numbers

for the 128 bit encryption.

You can preset up to four keys in the Key #1

to #4 ﬁ elds. Select Key #1, for example, and

enter your key of choice with the required

length.

Examples:

64 bit Hex (10 characters) = 0x231074a6ef

128 bit Hex (26 characters) = 0x231074a6b9773ce43f91a5bef3

Click SAVE at the bottom of the window to save your settings.

4.2 WPA and WPA2 encryption:

Wi-Fi Protected Access (WPA) is an encryption method for WLAN. WPA contains the WEP architecture, but offers

additional protection using dynamic codes that are based on the Temporal Key Integrity Protocol (TKIP). WPA

also offers pre-shared keys (PSK) for user authentication. WPA2is a development of WPA and uses a different

encryption algorithm, the Advanced Encryption Standard (AES).

Choose between WPA-PSK and WPA2-PSK

in the Authentication Type ﬁ eld.

Next, enter the “Pre-Shared Key” (PSK).

The key must be between 8 and 63random

characters; letters (A-Z), numbers and

punctuation marks are permitted. Any client

wanting to access the access point must

know this character string.

Click SAVE at the bottom of the window to

save your settings.

4.3 Advanced settings:

Only the 802.11b/g ﬁ eld is

relevant here. You can set

your Wireless LAN access

point so that this is only

communicated to other clients

that are based on the 802.11b

(11 Mbps) or 802.11g (54 Mbps) standard. The Hama WLAN ADSL2+ Modem Router 54 Mbps supports the following

standards:

802.11b = only WLAN devices based on 11 Mbps are supported.

802.11g = only WLAN devices based on 54 Mbps standard are supported.

802.11b+g = WLAN devices based on 54 and 11 Mbps standards are supported at the same time.

Click SAVE at the bottom of the window to save your settings.

4.4 Wireless MAC Address Filtering:

With this function, you can

stipulate which notebooks

and PCs with Wireless LAN

are allowed/denied access

to your network/Internet

by entering their MAC

addresses.

First, this function needs to be

activated. Do so by selecting

Activated in the Active: ﬁ eld.

Then choose either Allow

Association or Deny Association in the Action ﬁ eld, for the respective computer.

Allow Association: Only the MAC addresses that you have entered are given access.

Deny Association: None of the MAC addresses that you have entered are given access.

Enter the MAC address of your ﬁ rst chosen computer in the MAC Address #1 ﬁ eld:

Example: The MAC address of your computer is 00:12:34:56:0A:0A, so you enter this address into the Mac Address

#1 ﬁ eld, exactly as it is written on your computer.

To ﬁ nd out the MAC address of your computer, refer to the operating instructions for your operating system, or ask

your system administrator. For additional computers, proceed as outlined above.

Click SAVE at the bottom of the window to save your settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama 62727 - WLAN Modem Router ADSL2 plus Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info