Bedienungsanleitung Hama 62747 Wireless LAN Router NAS (Seite 7 von 17) (Englisch)

607689

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

3.2.1.3 Operation as an AP Bridge Point to Multi-Point

The difference to the AP Bridge Point to Point operation is

that you can enter the MAC addresses of several access

points in this mode. Bridge connections can be establis-

hed to a maximum of 6 other access points. Selecting

this under Band allows you to specify whether the device

runs ion the 2.4 Ghz band in accordance with the 802.11b

(11Mbps), 802.11g (54Mbps) standards or works in combi-

nation with 802.11b and 802.11g. Channel Number allows

you to select the channel in which the data is to be trans-

ferred. 13 channels are available. Enter the addresses of

the access points to which the bridge connection is to be

made in MAC address 1 to MAC address 4.

To set the encryption for your wireless network, click the

Set Security button.

Continue reading on page 10 for instructions on setting

Wireless LAN encryption.

Click Apply in the next window, and again in the window after that if you want to operate a wireless network without encryption. The

router is then restarted. The wireless network is available after you restart.

3.2.1.4 Operation as an AP Bridge WDS

What is WDS? Wireless Distribution System is the name for wireless connections between multiple access points, and also allows

clients to log-in, which is not permitted by other bridge modes. The bandwidth of the network is halved for each additional access

point as the packets have to be sent twice.

This makes it a combination of the previous modes.

Selecting this under Band allows you to specify whether

the device runs ion the 2.4 Ghz band in accordance with

the 802.11b (11Mbps), 802.11g (54Mbps) standards or

works in combination with 802.11b and 802.11g. The ESSID

is required for the client network. It acts as identiﬁ cation

in the network and must therefore be identical for all

users in the client network. The ESSID can be up to 32

characters long.

Channel Number allows you to select the channel in

which the data is to be transferred. 13 channels are

available. Enter the addresses of the access points

to which the bridge connection is to be made in MAC

address 1 to MAC address 4. To set the encryption for your

wireless network, click the Set Security button.

Continue reading on page 10 for instructions on setting

Wireless LAN encryption.

Click Apply in the next window, and again in the window after that if you want to operate a wireless network without encryption. The

router is then restarted. The wireless network is available after you restart.

3.2.2 Setting the Encryption for AP

First, it is important to understand a range of terms. The next section will explain the main terms used here:

Authentication: Authentication is a process in which the identity, e.g. of a person is determined based on a certain characteristic.

This can be done by ﬁ ngerprint, password or any other proof of authorisation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama 62747 Wireless LAN Router NAS Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hama 62747 Wireless LAN Router NAS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info