Bedienungsanleitung Hama 62763 Wireless LAN (Seite 5 von 14) (Englisch)

607688

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

In addition to the access data, you can make the following entries:

MTU stands for Maximal Transfer Unit and speciﬁ es the maximum packet size to be transferred. If you are not sure about this setting,

we recommend leaving the standard value set. Values between 512 and 1492 can be set.

The Connection Type entry sets the dial-in action of your router. You can then select either:

Continuous: The router is always connected to the internet. This connection type is recommended if you have a ﬂ at-rate with no time

limit, for example.

Connect on demand: With this connection type, the router does not dial in until it receives a request from a connected computer, e.g.

if you open the internet browser on a computer. The connection is maintained until the period set under Idle Time Out has passed

without activity.

Manual: If you choose the Manual connection type, you can make the connection by clicking Connect, and close it by clicking

Disconnect.

Note! The “Connect as required” setting is recommended for volume or timed rates, so that the internet connection is discon-

nected automatically after the period set in the „idle time” option. Connection costs may be high if permanently connected.

Please also note that closing the browser does not automatically disconnect from the internet. Many programs send

queries to the internet or receive data from it without this being clearly visible. For the router, these queries are just as

valid as opening a browser, for example. If you want to ensure that there is no active connection to the internet, you should

switch off the device or disconnect it from the modem.

Idle Time Out: Enter the length of time you want to wait before internet connection is cut off when inactive. Values between 1 and

1000 can be set. Click OK to conﬁ rm your entries. You must then restart the router for the settings to take effect. Click Apply in the next

window to save the settings. The router takes approx. 30 seconds to restart. After the restart the router is conﬁ gured so that you can

access the internet via the connected computers. You can also edit these settings manually, by clicking WAN in the menu on the left

and then selecting the corresponding connection type.

3.2 Conﬁ guring the Wireless LAN

Wireless LAN is deactivated by default for security reasons. To activate this function, from the start view which can be accessed

by clicking Home, select General Setup and then Wireless in the menu on the left. Note that activating Wireless LAN without also

setting encryption results in a security risk. Select Enable and then click Apply. Read Basic Settings for Wireless Networks for further

instructions!

3.2.1 Basic Settings for Wireless Networks (WLAN)

Select Basic Settings in the menu on the left.

The Mode setting allows you can select the task the router is to perform in the network.

Select the AP (3.2.1.1) access point function if the device is the only access point in your network or if no bridge level connection is to

be made to other access points.

Select the Station Ad-Hoc (3.2.1.2) if your router should work as client and not as access point in the network. In this operating mode,

a connection to other Ad-Hoc-Clients is possible. (Ad hoc signiﬁ es WLAN network without access point).

Select the Station Infrastructure (3.2.1.3) if your router should work as client and not as access point in the network. In this operating

mode, the router can be registered as client to another access point.

Select AP Bridge-Point to Point (3.2.1.4) if you want to connect this access point wirelessly to a second access point. In this mode,

clients cannot log-in via a wireless connection.

Select AP Bridge-Point to Multi-Point (3.2.1.5) if you want to connect this access point wirelessly to several other access points. In

this mode, clients cannot log-in via a wireless connection.

Select AP Bridge WDS (3.2.1.6), if you want to connect this access point to one or more other access points wirelessly and clients are

to be allowed to log in wirelessly.

Continue conﬁ guration as required.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama 62763 Wireless LAN Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hama 62763 Wireless LAN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info