607479
9
Zoom out
Zoom in
Vorherige Seite
1/37
Nächste Seite
18 19
2. And connect them with the units.
3. Supply Power : DC 6V
Note:
User can also install 3 alkaline AAA batteries instead of the supplied
rechargeable batteries.
Or directly operated by the supplied adaptors.
Testing Before First Time Usage
Test the Transmitter emission and the Receiver reception.
Place Transmitter and Receiver in room where you intend to use it.
Set both Transmitter and Receiver to the same channel (01 or 02) by switching
the OFF/CH1/CH2 channel switch. Selected channel will be shown on the
top right corner of the LCD screen.
Set both Transmitter and Receiver to the same pilot tone when using. By
selecting a Dip switch(ON/DIP/1/2/3/4) at the battery compartment for different
pilot tones to ensure privacy. There are 16 combinations of pilot tone for use
selection. (Please refer to the PILOT TONES COMBINATION TABLE)
NOTE:
It is important that with both units the switch settings are the same because if
this is not the case the transmitter and the receiver will not be able to connect to
one another.
Transmitter emission:
1. By using the SENSITIVITY knob you can turn in the sensitivity of the
transmitter individually, according to your wishes.
2. As soon as the transmitter transmits a signal the “Baby calling icon will be
ashed on the LCD screen. During the entire transmission the LCD backlight
is activated.
3. If the transmitter hears hardly any noise, it automatically switches to the
energy saving mode. “Baby sleeping” icon shown on the LCD screen and the
LCD backlight will automatically be turned off.
Receiver reception:
1. By turning the volume knob from right side the receiver will be turned on. After
turning it on the LCD display is activated and indicates you that the unit is
ready for operation. The channel being used will be displayed in the top right
of the LCD screen. By turning the volume more you can adjust is as you wish.
2. If the unit receives a signal, the LCD backlight lights up automatically during
the entire transmission and the “Baby calling” icon ashes.
3. A few seconds after the unit receives no more signals, the receiver is
automatically switched to energy saving mode. The “Baby sleeping” icon will
be shown and the LCD backlight will automatically turned off.
Set Up & Use
IMPORTANT! Test sound reception before use and whenever location of
transmitter is changed. (Refer to Testing Before First Time Usage)
1. Transmitter detects sound levels within a range of 1 to 2 meters (3 to 6.5 feet)
for NORM setting.
2. Place transmitter in the same room with child. Point microphone directly
toward child location, such as crib or playing area.
3. Set both Receiver and Transmitter to the same channel (01 or 02) and pilot
tone.
4. Push transmitter SENSITIVITY switch to a desired position.
5. Adjust different detecting sound level sensitivity by switching the SENSITIVITY
switch.
6. The receiver will go to energy saving mode and “Baby sleeping” icon shown
when it doesn‘t detect sound from the surrounding area.
7. Place receiver where you stay and hear it.
8. Set the receiver to the same channel and pilot tone with the transmitter by
switching OFF/CH1/CH2 switch and Dip switch.
9. Rotate VOLUME knob to adjust volume.
10.Turning off by slide the OFF/CH1/CH2 switch to “OFF” position.
Note:
Position the Transmitter at least 1 meter away from the baby for transmission.
Plug the adaptor into the nearest standard household electrical outlet.
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hama BC300 - 92660 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info