Bedienungsanleitung Hama DIR3020 (Seite 21 von 25) (Englisch)

723728

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

13.1.3 Manual configuration of network connection –

wireless (WLAN)

• To manually congure a network connection, proceed

as follows:

• Press [ ] (4) to go to the system settings.

• Use [NAVIGATE/ENTER/VOLUME] to navigate to the

"Network" menu item.

• Conrm the selection by pressing [NAVIGATE/

ENTER/VOLUME].

• Use [NAVIGATE/ENTER/VOLUME] to navigate to the

"Manual settings" menu item.

Manual conguration wireless (WLAN) – DHCP enable

• Select the option "Wireless".

• Selection the option "DHCP enable".

• In the input screen, enter the whole SSID (network name)

and then conrm with the OK button.

• Now choose the security standard used by the network.

This can be found in the conguration options of your

router or access point.

• Depending on the encryption used, you may need

to enter the network key before the connection

is established.

Manual conguration wireless (WLAN) – DHCP disable

This method corresponds to conguration with an active

DHCP server (manual conguration wireless (WLAN) -

DHCP enable), however you must also enter the network

information such as the IP address, subnet mask, gateway

address and DNS (primary and secondary).

Find this information in the web interface of your router

or access point, or if this information is already correctly

entered, you can conrm the entry. The radio now attempts

to establish the connection.

13.1.4 View settings

This is where you will nd all of the key information about

all network connections that the radio is currently using,

or which have been set up, e.g.: MAC address, WLAN

region, DHCP enable / disable, SSID, IP address, subnet

mask, gateway address, DNS (primary/secondary), etc.

• Press [

] (4) to go to the system settings.

• Use [NAVIGATE/ENTER/VOLUME] (9) to navigate to

the "Network" menu item.

• Conrm the selection by pressing [NAVIGATE/

ENTER/VOLUME].

• Use [NAVIGATE/ENTER/VOLUME] to navigate to the

"View settings" menu item.

13.1.5 Network profile

The radio automatically saves all successful network

connections (proles). This means that re-establishing

these connections (for example, after the radio was

disconnected from the power supply) does not require you

to re-enter the network access information.

To remove network proles individually, proceed as follows:

• Press [

] (4) to go to the system settings.

• Use [NAVIGATE/ENTER/VOLUME] (9) to navigate to

the "Network" menu item.

• Conrm the selection by pressing [NAVIGATE/

ENTER/VOLUME].

• Use [NAVIGATE/ENTER/VOLUME] to navigate to the

"Network prole" menu item.

• Select a network prole and press [NAVIGATE/

ENTER/DELETE] to remove it.

• Conrm the prompt querying if you want to delete

the network prole with YES.

• A prole that is currently active, or that is in use,

cannot be deleted.

Note

• Before giving or selling the radio to someone else,

we recommend performing a factory reset.

• This will completely and permanently delete all

network information and connections stored on

the device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama DIR3020 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hama DIR3020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info