Bedienungsanleitung Hama DIT1010BT (Seite 14 von 33) (Englisch)

723745

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

5.1 General notes on use

5.1.1 Switch On/Off / Standby

• Press [POWER/VOLUME/ENTER/NAVIGATE] (9) to

switch on the tuner.

• Press and hold [POWER/VOLUME/ENTER/NAVIGATE]

(9) for 3 seconds to switch the tuner off (standby).

• To completely switch off the device, disconnect it from

the power supply.

5.1.2 Navigation and controls

• After pressing a shortcut button, navigate through the

menu items using.

• Select the individual menu items by turning [POWER/

VOLUME/ENTER/NAVIGATE] (9).

• Conrm the selection by pressing [POWER/VOLUME/

ENTER/NAVIGATE] (9).

5.1.3 Volume adjustment / mute

• Turn the volume up (right) or down (left) by turning

[POWER/VOLUME/ENTER/NAVIGATE] (9) accordingly.

• Press [

] on the remote control to mute the tuner.

• Press [ ] again on the remote control to reset the

volume to the value before it was muted.

5.2 Connecting and starting up

Warning

• Only operate the product from a socket that has been

approved for the device. The socket must be installed

close to the product and must be easily accessible.

• Disconnect the product from the power supply using

the On/Off switch – if this is not available, unplug the

power cord from the socket.

• If using a multi-socket power strip, make sure that the

total power consumption of all connected devices does

not exceed the power strip's maximum throughput

rating.

• If you will not be using the product for a prolonged

period, disconnect it from mains power.

• Connect the power supply to the mains connection (1) on

the back of the tuner.

• Connect the network cable to a properly installed and

easily accessible network socket.

• Wait until the tuner has initialised fully.

• Press [POWER/VOLUME/ENTER/NAVIGATE] (9) to

switch on the tuner.

Note – switching on for the rst time

• The Setup Wizard starts up automatically when the

device is turned on for the rst time.

• The default used language is English.

• You can skip the Wizard and start it up again later in

German.

Once the product has been connected to mains power,

initialisation takes place. The tuner is started.

To assist you with the rst-time setup of the tuner, a Setup

Wizard is provided.

5.3 General notes on use

Notes on use

• These operating instructions always relate to operation

using the controls on the device. Functions that are

only usable by app or remote control are explained

separately.

• For information on the buttons on the remote control

and their functions (

≙

) that correspond to the control

buttons on the device, please see the Controls and

displays.

• [OK] and the navigation button ► on the remote

control correspond to pressing [POWER/VOLUME/

ENTER/NAVIGATE] (9).

• The navigation button ◄ on the remote control

corresponds to [

] (4) on the front of the tuner.

• The navigation buttons ▲/ ▼ correspond to turning

[POWER/VOLUME/ENTER/NAVIGATE] (9) to the left

and right on the front of the tuner.

• When a selection among menu items is to be made

(such as YES or NO), the one currently selected has a

light-coloured background ll.

• In menus offering a variety of different options (such

as Equalizer, Update, and so on), the currently selected

option is marked with #.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama DIT1010BT Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hama DIT1010BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info