Bedienungsanleitung Hama DIT1010BT (Seite 11 von 102) (Alle Sprachen)

723745

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

Note –switching on for the rst time

• The Setup Wizardstarts up automatically when the

radio is turned on for the rst time.

• The default used language is English.

• Youcan skip the Wizardand start it up again later in

German.

5.3 Language

The rst time it is used, the tuner's default language is

English. To change tuner's menu language, proceed as

follows:

• Press [

](6) to access the Settings menu.

• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate

to the "Settings" menu item.

• Conrm the selection by pressing [POWER/VOLUME/

ENTER/NAVIGATE] (9).

• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate

to the "Language" menu item. Conrm the selection by

pressing [POWER/VOLUME/ENTER/NAVIGATE] (9).

• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to select

your preferred system language.

• The language setting currently selected is marked with

an asterisk (*).

Note

•The following languages areavailable:

English, German, Danish, Dutch, Finnish, French,

Italian, Norwegian, Polish, Portuguese, Spanish,

Swedish, Turkish

6. Connections

Note

• Connections that areestablished by means of an

optical signal cable areless affected by electrical

or magnetic interference than connections that are

established via a3.5 mm audio cable.

6.1 Connection via Optical OUT

Youcan connect your loudspeaker to the tuner via the

digital audio output, for example, and play its audio

signals via the loudspeaker.

Note

• Switch the tuner off beforeconnecting adevice to it.

• Beforeconnection, remove the safety caps from both

ends of the optical signal cable.

• Do not bend or crush the cable.

• Forplayback via the optical audio connection, connect

an optical signal cable to the tuner's optical audio

output (3) and the loudspeaker's optical audio input.

• Press [POWER/VOLUME/ENTER/NAVIGATE] (9) to switch

on the tuner.

• The tuner's audio signal is now output via the

loudspeaker.

6.2 Connection via LINE OUT

Youcan connect your loudspeaker to the tuner via the

analogue audio output, for example, and play its audio

signals via the loudspeaker.

Note

• Switch the tuner off beforeconnecting adevice to it.

• Do not bend or crush the cable.

• Forplayback via the analogue audio connection,

connect a3.5 mm RCAcable to the tuner's analogue

audio output (2) and the loudspeaker's analogue audio

input.

• Press [POWER/VOLUME/ENTER/NAVIGATE] (9) to switch

on the tuner.

• The tuner's audio signal is now output via the

loudspeaker.

7. Care and Maintenance

• Only clean this product with aslightly damp, lint-free

cloth and do not use aggressive cleaning agents.

• If you do not plan to use the product for aprolonged

period, turn off the device and disconnect it from the

power supply.Storeitinaclean, dry place away from

direct sunlight.

8. Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no

warranty for damage resulting from improper installation/

mounting, improper use of the product or from failureto

observe the operating instructions and/or safety notes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama DIT1010BT Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hama DIT1010BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info