Bedienungsanleitung Hama DR1610BTS (Seite 15 von 21) (Englisch)

723737

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

10. Bluetooth

Youcan pair your terminal device with the radio using

Bluetooth and use it as aplayback device. Youcan control

playback directly on the terminal device. Youcan adjust the

volume on the radio, as well.

Note –Bluetooth

• Check whether your mobile device (smartphone,

tablet, etc.) is Bluetooth-capable.

• Note that the maximum range for Bluetooth is 10

metres without obstacles such as walls, people, etc.

• The Bluetooth connection may be disrupted by other

Bluetooth devices/connections in the vicinity.

• It is only possible to connect the radio to one terminal

device.

• Note that compatibility depends on the supported

Bluetooth proles as well as the Bluetooth versions

being used. (see technical specications, operating

instructions of the terminal device in use)

Enable Bluetooth operating mode on the radio by

repeatedly pressing [mode]:

[mode]

10.1 Bluetooth pairing

• Make surethat your Bluetooth-capable terminal device is

on and Bluetooth is activated.

• Open the Bluetooth settings on your terminal device and

wait until DR1610BTS appears in the list of Bluetooth

devices found.

• If necessary,start searching for Bluetooth devices on your

terminal device.

• Select DR1610BTS and wait until the radio is shown as

connected in the Bluetooth settings on your terminal

device.

• Your terminal device is also shown as connected on the

radio display.

• Start and control audio playback using the controls of the

terminal device.

Note –Bluetooth Password

Some terminal devices requireapasswordinorder to

connect to another Bluetooth device.

• If your terminal device requests apasswordfor

connection to the radio, enter 0000.

10.2 Automatic Bluetooth connection

(after successful pairing)

• Terminal devices already paired with the radio are

automatically saved on the radio.

• If you arepairing the terminal device with the radio for

the rst time, proceed as described in 10.1. Bluetooth

pairing.

• Make surethat your Bluetooth-capable terminal device is

on and Bluetooth is activated.

• The devices will be automatically connected.

• If necessary,open the Bluetooth settings on your terminal

device and select DR1610BTS.

• Start and control audio playback using the controls of the

terminal device.

Note –impaired connection

After the radio and terminal device have been paired, a

connection is established automatically.Ifthe Bluetooth

connection is not established automatically,check the

following:

• Check the Bluetooth settings on your terminal device

to see whether DR1610BTS is connected. If not, repeat

the steps listed under Bluetooth pairing.

• Check whether your terminal device and the radio are

less than 10 metres apart. If not, move the devices

closer together.

• Check whether obstacles areimpairing the range. If

so, move the devices closer together.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama DR1610BTS Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hama DR1610BTS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info