Bedienungsanleitung Hama EWS170 - 92654 (Seite 8 von 32) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

607473

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

DCF 77 RADIO CONTROLLED CLOCK

The radio-controlled time is calculated by the Cesium Atomic clock of Braunschweig

(ofcial clock of Germany). Then the time is coded and transmitted from Mainingen – near

Frankfurt – via a signal on DCF-77 (77.5 kHz). The transmitting range of the signal is 1500 km,

which means that most of Western and Central Europe is covered by this signal.

Within this range the received time is completely accurate. Once sensor signal(s) are

received, the wave icon will ash to indicate that the receiving unit starts to receive

the DCF radio controlled time signal. Radio Controlled wave icon can indicate 4 levels

of signal status:

Very weak Weak Medium Strong

Once the time signal is received, the wave icon will stay on the LCD, and time and calendar will

automatically be updated.

Note: During the 10-minute time signal reception, all manual settings will be suspended.

If setting is desired, press once [ + ] key to deactivate the reception. You can also press

and hold the same key for 2 seconds to manually activate the reception in normal mode.

SET THE CLOCK & CALENDAR

1. Press & hold [ ] button for 2 seconds to enter clock setting mode.

Flashing 24 hours will appear.

2. Press [ + ] or [ - ] button to switch between 24 hours and 12 hours format,

and then press [ ] button to conrm.

3. The hour digits will ash. Use the [ + ] button to increase by one hour or [ - ] button to

decrease by one hour to your desired hours. Holding down either button will change the

increment rapidly. Press [ ] button to conrm.

4. The minute digits will ash. Use the [ + ] button or [ - ] button to set your desired minutes.

Holding down either button will change the increment rapidly. Press [ ] button to

conrm.

Note: Every change of minute digit will automatically reset the seconds to zero.

5. The year digit will ash and Yr icon appears. Press [ + ] or [ - ] button to set your desired

year. Press [ ] button to conrm.

Note: Year range is from 2000 to 2099.

6. D and M icons will ash. Press [ + ] or [ - ] to select D M (Date Month) or M D (Month Date)

format. Press [ ] button to conrm.

7. Month digits will ash. Press [ + ] or [ - ] button to set your desired month. Press [ ] button

to conrm. Do the same to set Date.

TO SET DAILY ALARM

1. In clock time display mode, press [ ] button twice to display alarm time for 10 seconds.

2. Press [-] button in alarm display mode to arm or disarm the daily alarm.

3. Press and hold [ ] for 2 seconds to enter the alarm setting mode.

4. The hour digit will ash, use [ + ] button to increase by one hour or [ - ] button to decrease by

one hour to your desired hours. Hold down the button will change the increment

rapidly. Press [ ] button to conrm.

5. The minute digits will ash. Use [ + ] button to increase by one minute or [ - ] button to

decrease by one minute to your desired minutes. Hold down the button will change the

increment rapidly. Press [ ] button to conrm and nish the setting.

HOW TO SET TEMPERATURE ALERT

1. Press [ ] key to your desire Hi or Lo temperature limit for designated IN or REMOTE

thermo at the desirable channel;

2. Press and hold the [ ] key for 2 seconds, the corresponding display digits start blinking;

3. Use the [ + ] & [ - ] keys to change for your desired setting;

4. Press [ ] key to conrm setting and exit the setting mode. (“ ” or “ ” icon appears to

indicate the lower or upper alert is armed)

5. Auto-exit the temperature alert display and returns to current temperature display mode

after 5 seconds. (Hi-Lo temperature limit icon disappears; leaving “ ” or “ ” icon to

indicator alert is armed.)

6. To disarm the temperature alert – go to the desired temperature alert display mode, press [

- ] key once to disable the alert, the “ ” or “ ” icon disappears.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama EWS170 - 92654 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info