Bedienungsanleitung Hama Gentleman L (Seite 5 von 92) (Alle Sprachen)

723762

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

Note –Connection to anew device

• If you want to connect anew

Bluetooth

terminal

device to the speaker,press the

Bluetooth

function button (7) until the

status LED (7)

begins to ash blue and an acoustic signal

sounds..

• The current connection is disconnected and the

search for new terminal devices starts.

• The speaker always stores the last eight terminal

devices paired.

• The speaker will automatically connect to the last

terminal device paired when it is switched on the

next time.

4.4 Automatic

Bluetooth

connection (after

successful pairing)

• Make surethat your

Bluetooth

capable terminal

device is on and

Bluetooth

is activated.

• Make surethat the speaker is located within the

Bluetooth

range of max. 10 metres.

• Switch on the speakers as described in

4.1

Switching the product on and off.

• After successful connection, the status LED (7) will

light up in blue. An acoustic signal conrms that

connection was successful.

Note –Connection impaired

• After the speaker and terminal device have been

paired, aconnection is established automatically.

If the

Bluetooth

connection is not established

automatically,check the following:

• Check the

Bluetooth

settings of your terminal

device to see whether Hama Gentleman-L is

connected. If not, repeat the steps listed under

Bluetooth

pairing.

• Check whether your terminal device and the

speaker areless than 10 metres apart. If not, move

them closer together.

• Check whether obstacles areimpairing the range.

If so, move the devices closer together.

4.5 Audio playback (via

Bluetooth

)

Start and control audio playback on the connected

terminal device accordingly.Alternatively,audio

playback can also be controlled on the speaker (if the

connected device supports this function).

• tPress the ►

function button (4) to start or pause

audio playback.

• Brieypress the +function button (5) to skip to the

next track.

• Brieypress the –function button (3) to go back to

the previous track.

• Hold down the +function button (5) to increase the

volume.

• Hold down the –function button (3) to reduce the

volume.

4.6 Hands-free function

Youcan use the speaker as ahands-free set for your

mobile phone. Forthis function, the mobile phone must

be connected to the speaker via

Bluetooth

• Press the function button

(6) once to answer an

incoming call.

• Press and hold the function button (6) for approx. 2

seconds to reject an incoming call.

• Youcan put acallonhold by pressing and holding

the function button

(6) for approx. 2seconds.

• Press and hold the function button (6) again to

continue the call.

• During acall, press the function button (6) once to

end the call.

Note –Call quality

To increase the callquality,make surethat you are

near the speaker with your mobile phone during the

call.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama Gentleman L Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info