Bedienungsanleitung Hama IR111MS (Seite 30 von 40) (Englisch)

723754

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Manual conguration wired (LAN) – DHCP enable

•Select the option Wired.

•Select the option DHCP enable.

•The connection is now established. No further setting

adjustments are required.

Manual conguration wired (LAN) – DHCP disable

•Select the option Wired.

•Select the option DHCP disable.

•Enter the necessary network information, such as the

IP address, subnet mask, gateway address and DNS

(primary and secondary).

Find this information in the web interface of your router

or access point, or ask your network administrator. Once

all the information has been entered correctly, conrm

to proceed. The radio now attempts to establish the

connection.

Manual conguration wireless (WLAN) –

DHCP enable

•Select the option Wireless.

•Select the option DHCP enable.

•In the input screen, enter the whole SSID (network name)

and then conrm with OK.

•Now choose the security standard used by the network.

This can be found in the conguration options of your

router or access point.

•Depending on the encryption used, you may need

to enter the network key before the connection is

established..

Manual conguration wireless (WLAN) –

DHCP disable

The method described here assumes the DHCP server is

active (manual wireless conguration(WLAN) – DHCP

enable). However, the network information such as IP

address, subnet mask, gateway address, and DNS (primary

and secondary) must still be entered.

Find this information in the web interface of your router

or access point, or ask your network administrator. Once

all the information has been entered correctly, conrm

to proceed. The radio now attempts to establish the

connection.

13.2.5 View settings

Here you can nd all the most important information about

all network connections currently used or congured on

the radio, such as: MAC address, WLAN region, DHCP

active/disabled, SSID, IP address, subnet mask, gateway

address, DNS (primary and secondary), etc.

[menu]

System settings



Network



View settings

13.2.6 NetRemote PIN Setup / Smart Radio-App

The radio can be controlled using the application Hama

Smart Radio.

For this, you have to have installed the app on your

terminal device (for example smartphone or tablet PC)

and your device has to be in the same network as your

radio. The PIN saved in the radio is to increase security and

prevents other users from connecting with the radio.

If the app is started on your terminal device (for example

smartphone or tablet PC) and it tries to connect with the

radio, a window will appear on your device requiring you

to enter the PIN.

•You can nd and change the PIN as follows:

[menu]

System settings



Network



NetRemote PIN Setup

•The radio PIN is set to 1234 by default.

•Use [enter/navigate] to make changes.

•Conrm your changes by choosing OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama IR111MS Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hama IR111MS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info