Bedienungsanleitung Hama PDR20 (Seite 13 von 16) (Englisch)

723750

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

13. Snooze

The radio has atimer function, which switches the radio

to standby mode after apre-dened length of time

irrespective of the operating mode.

• Press [

/ ](11) and go to the “System” menu item.

Press [OK] (8) to conrm.

• Select the “Sleep” menu item and press [OK] (8) to

conrm.

• Youcan use the navigation buttons (7/9) to set the value

for the timer.

• Conrm your setting by pressing [OK] (8).

• [

]inthe playback screen indicates that the sleep

timer is enabled.

14. Alarm clock

The radio allows you to set two different alarm times.

14.1 Settings

Note

• Note that the alarm only works in standby mode

(charging) and playback mode.

To access the alarm settings, proceed as follows:

• Press [

/ ](11) and go to the “System” menu item.

Press [OK] (8) to conrm.

• Select the “Alarm” menu item and press [OK] (8) to

conrm.

The conguration of alarm 1and alarm 2isidentical. They

allow two alarm times to be saved independently.Select

alarm 1or2and conrm your selection by pressing [OK]

(8).

Use the navigation buttons [

]/[Vol-] (7) /[ ]/[Vol+] (9) and

[OK] (8) to set the following details.

Mode:

Choose when the alarm is to activate:

“Add arrow symbol” Daily –Once –Onweekdays –On

weekends

Time:

Select the hours for the alarm time rst, and then the

minutes.

Duration:

Select atime interval (15/30/45/60/90 minutes). The alarm

remains active for the selected time interval.

Mode:

Set whether you wish to be woken by an alarm tone

(buzzer), DABorFM.

Programme:

If you selected DAB/FM, choose which station you wish

to be woken with. Youcan choose any of the 30 favourite

station slots or the last listened.

Volume:

Select the volume with which you would like to be woken.

This setting makes the volume level when you last listened

to the radio irrelevant.

Saving:

Choose Off/On to nish the alarm settings.

Note

• We recommend allowing automatic time updates.

This ensures that the time is always updated, even

after the power supply is disconnected –for example,

if the power fails.

14.2 Activating/deactivating the alarm

• Activate the alarm by pressing On to complete the

settings.

• Deactivate the alarm by pressing Off to complete the

settings.

14.3 Stopping the alarm

When the alarm activates, press [

/ ](10) to stop the

alarm.

15. System settings

15.1 Time settings

The radio attempts to obtain the current time information

from all available sources as per the default settings.

• Press [

/ ](11) and go to the “System” menu item.

Press [OK] (8) to conrm.

• Select the “Time” menu item and press [OK] (8) to

conrm.

Time and date settings

• Youuse the navigation buttons (7/9) to set the time and

date digit by digit.

• Press [OK] (8) to conrm the setting of each digit and

move to the next one.

• After you complete the entry,the message “Time saved”

is shown in the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama PDR20 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hama PDR20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info