Bedienungsanleitung Hama RC150 - 123189 (Seite 5 von 44) (Deutsch, Englisch, Holländisch, Französisch, Spanisch, Polnisch)

607403

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

•To stop the alarm early, move the ALARM ON/OFF slide switch (4) to the OFF

position to the right until the surface underneath the slide switch is black. The alarm

is now deactivated.

•Move the ALARM ON/OFF slide switch (4) back to the ON position on the left

again to activate the alarm for the next day.

Note – Snooze function

•While the alarm signal is sounding, press the SNOOZE/LIGHT button (7) to

activate the snooze function. Zz begins to ash on the display (1). The alarm

signal will be stopped for 5 minutes, after which it will sound again.

•The snooze function can be activated four consecutive times.

5.5. Temperature display

•Press and hold the WAVE button (10) for approx. 2 seconds to switch the

temperature display (B – 6) between °C and °F.

•This is only possible if the OFF/US/UK/DE/JP slide switch (12) is set to the US, UK

or DE position.

•If the measured values are outside the measurement range, the temperature display

(B – 6) will show Lo (< -40 °C/-40 °F) or HI (> 70 °C/158 °F).

5.6. Backlight

•If you press the SNOOZE/LIGHT button (7), the display (1) will light up for approx.

5 seconds.

•The alarm clock is equipped with a twilight sensor (8) that automatically switches

on the backlight of the display (1) to a dimmed setting as soon as it gets dark.

•During the day or if there is enough light, the twilight sensor (8) automatically

switches off the dimmed backlight on the display (1).

•Move the

ON/OFF slide switch (9) to the ON or OFF position to activate or

deactivate the twilight sensor (8).

Note – Day of the week

•You can choose from English (GB), French (FR), German (DE), Spanish (ES) and

Italian (IT) for the display of the day of the week.

5.4. Alarm

Setting the alarm time

•Press and hold the button (3) for approx. 2 seconds until the hours display (B –

10) begins to ash.

•Set the following information in the order listed:

•Hours

•Minutes

•To select the individual values, press the button (5) or the button (6) and

conrm your selection by pressing the button (3).

•If you do not make an entry for 30 seconds, the device automatically exits the

settings mode and the settings you made are saved.

•Press the button (3) to display the set alarm time for approx. 5 seconds.

Activating/deactivating the alarm

•Move the ALARM ON/OFF slide switch (4) to the left to the ON position. A red

surface will be visible underneath the slide switch.

•The alarm is activated and the alarm clock icon (B – 12) is shown on the display (1).

•Move the ALARM ON/OFF slide switch (4) to the OFF position to the right until the

surface underneath the slide switch is black.

•The alarm is deactivated and the alarm clock icon (B – 12) disappears from the

display (1).

Stopping the alarm/snooze function

•If the alarm is activated, it is triggered at the set time and an alarm signal sounds

for one minute. The alarm automatically stops after this time and is then triggered

again the next day at the set alarm time.

Alarm time (B – 10)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama RC150 - 123189 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info