Bedienungsanleitung Hama Rockman L (Seite 6 von 100) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

723771

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

4.4

Bluetooth

pairing

Note

• Check whether your mobile device (MP3 player,

mobile phone, etc.) is

Bluetooth

capable.

• If not, you can only use the speaker for playback

using the included audio cable.

• Note that the maximum range for

Bluetooth

10 metres without obstacles such as walls, people,

etc.

• Make sure that your

Bluetooth

capable terminal

device is on and

Bluetooth

is activated.

• Make sure that the speaker is located within the

Bluetooth

range of max. 10 metres.

• Switch on the speakers as described in

4.1

Switching the product on and off.

• The status LED (1) starts to ash in blue. The speaker

searches for a connection.

• Open the

Bluetooth

settings on your terminal device

and wait until Hama Rockman-S

/Rockman-L

appears in the list of

Bluetooth

devices found.

• Select Hama Rockman-S/ Rockman-L and

wait until the speaker is listed as connected in

the

Bluetooth

settings on your terminal device.

An acoustic signal conrms that connection was

successful.

• The status LED (1) now remains blue.

Note –

Bluetooth

password

• Some terminal devices require a password in order

to connect to another

Bluetooth

device.

• If your terminal device requests a password for

connection to the speaker, enter 0000.

Note – Connection to a new device

• If you want to connect a new

Bluetooth

terminal

device to the speaker, press the function buttons

– (3) and + (5) at the same time until the status

LED (1) begins to ash in blue and an acoustic

signal sounds.

• The current connection is disconnected and the

search for new terminal devices starts.

• The speaker always stores the last eight terminal

devices paired.

• The speaker will automatically connect to the last

terminal device paired when it is switched on the

next time.

4.5 Automatic

Bluetooth

connection (after

successful pairing)

• Make sure that your

Bluetooth

capable terminal

device is on and

Bluetooth

is activated.

• Make sure that the speaker is located within the

Bluetooth

range of max. 10 metres.

• Switch on the speakers as described in

4.1

Switching the product on and off.

• After successful connection, the status LED (1) will

light up in blue. An acoustic signal conrms that

connection was successful.

Note – Connection impaired

• After the speaker and terminal device have been

paired, a connection is established automatically.

If the

Bluetooth

connection is not established

automatically, check the following:

• Check the

Bluetooth

settings of your

terminal device to see whether Hama

Rockman-S

/Rockman-L is connected. If not,

repeat the steps listed under

Bluetooth

pairing.

• Check whether your terminal device and the

speaker are less than 10 metres apart. If not, move

them closer together.

• Check whether obstacles are impairing the range.

If so, move the devices closer together.

• Check whether the audio cable is connected to the

speaker. If so, disconnect it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama Rockman L Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info