Bedienungsanleitung Hama SIRIUM1400ABT (Seite 8 von 11) (Englisch)

723727

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

6. Bluetooth pairing

You can pair your terminal device with the speaker via

Bluetooth and use the speaker as a playback device for

audio signals. You can control playback directly on the

terminal device. The volume can also be controlled directly

on the speaker.

Note – Bluetooth

• Check whether your mobile device (smartphone,

tablet, etc.) is Bluetooth

-capable.

• Note that the maximum range for Bluetooth

is 10

metr

es without obstacles such as wal

ls, people, etc.

• The Bluetooth

connection may be disrupted by other

Bluetooth

devices/connections in the vicinity.

• It is only possible to connect the speaker to one

terminal device.

• Note that compatibility depends on the supported

Bluetooth

proles as well as the Bluetooth

versions

being used. (See Technical specications, operating

instructions of the terminal device in use)

• Make sure that your Bluetooth-capable terminal device is

on and Bluetooth is activated.

• Press and hold the [Bluetooth] button (1) for approx. 2

seconds to activate Bluetooth mode (pairing mode).

• The Bluetooth status LED (1) begins to pulsate blue.

• Open the Bluetooth settings on your terminal device and

wait until Hama SIRIUM1400ABT appears in the list of

Bluetooth devices found.

• If necessary, start searching for Bluetooth devices on your

terminal device.

• Select the Hama SIRIUM1400ABT speaker in the list of

available devices and wait until the speaker is shown

as connected in the Bluetooth settings on your terminal

device.

• The Bluetooth status LED (1) is now constantly lit blue.

• Start and control audio playback using the controls of the

terminal device.

Note – Bluetooth

password

• Some terminal devices require a password in order to

connect to another Bluetooth

device.

• If your terminal device requests a password for

connection to the speaker, enter 0000.

7. Automatic

Bluetooth

connection

(after successful pairing)

• Terminal devices already paired with the speaker are

automatically saved on the speaker.

Note – Impaired connection

After the speaker and terminal device have been

paired, a connection is established automatically. If the

Bluetooth connection is not established automatically,

check the following:

• Check the Bluetooth settings of your terminal

device to see whether the Hama SIRIUM1400ABT

is connected. If not, repeat the steps listed under

Bluetooth pairing.

• Check whether your terminal device and the speaker

are less than 10 metres apart. If not, move the devices

closer together.

• Check whether obstacles are impairing the range. If

so, move the devices closer together.

8. Terminate

Bluetooth

connection

• If you activate Alexa, the Bluetooth connection between

the speaker and your terminal device is automatically

terminated.

• Press and hold the [Bluetooth] button (1) for about 3

seconds to disable the Bluetooth mode on the speaker.

• Alternatively, you can terminate the connection manually

on your terminal device.

9. Alexa function (voice control)

• After you have said the wake word (‘Alexa’) or pressed

the [Action / Microphone mute] button (3), the Alexa

status LED (5) is lit blue and a signal tone sounds. You

can now speak with Alexa.

• The Alexa status LED (5) ashes blue while Alexa

answers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama SIRIUM1400ABT Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hama SIRIUM1400ABT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info