Bedienungsanleitung Hama SIRIUM2000AMBT (Seite 9 von 20) (Englisch)

723723

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

4. Before commissioning

Preparing the remote control for use

Open the cover on the battery compartment. This can

be found on the back of the remote control and can

be opened by sliding in the direction indicated.

The extent of delivery includes two AAA batteries which

must be inserted into the battery compartment for the

remote control to work. When inserting the batteries,

ensurethat they areinserted with the correct polarity.

The relevant polarity (+ /-)ismarked inside the battery

compartment.

5. Getting started

Note

Use only original accessories (or: accessories approved

by Hama) to avoid damage to the pr

oduct.

Warning

• Only operate the product at asocket that has been

approved for the device. The socket must be installed

close to the product and must be easily accessible.

• Disconnect the product from the power supply using

the On/Off switch –ifthis is not available, unplug the

power cordfromthe socket.

• When using amulti-socket power strip, make sure

that the sum power draw of all the connected devices

does not exceed its maximum throughput rating.

• If you will not be using the product for along period

of time, disconnect it from mains power.

Switching on

• Connect the mains lead on the loudspeaker to aproperly

installed socket.

• The loudspeaker switches on automatically.

Note -switching on for the rst time

• When rst switched on, the loudspeaker is in "Device

setup" mode and the status LEDs (1-5) pulse.

• If setup mode is not active, brieypress the [SETUP]

button (2) on the back of the device with apointed

instrument (e.g. apaper clip) to activate WPS mode

(ashes rapidly). Alternatively,press and hold the

[SETUP] button (2) for around 7seconds to open an

AccessPoint (ashes slowly).

• At the next switch-on, all of the status LEDs (1-5) ash

orange until the connections made so far have been

restored. Depending on the Internet signal strength,

this may take up to 20 seconds.

Switching on /off /standby

• Press [POWER] (1) to switch on the loudspeaker.

Alternatively,press [POWER] (1) on the remote control.

• Press [POWER] (1) again on the device or the remote

control to switch the loudspeaker off.(Standby)

Note

• To switch the loudspeaker off completely,disconnect

it from the power supply.

Volume adjustment /mute

• Press [VOLUME -/+] to reduce /increase the volume.

• Press [ ](2) on the remote control to mute the

loudspeaker.

• Press [ ](2) again to reset the volume to the value

it was prior to being muted.

6. Setting up the loudspeaker

Note

• To be able to use all of the product's functions,

the Amazon Alexa App must also be downloaded

and an Amazon account set up. To do this, follow

the instructions in the Amazon Alexa App. More

information on this can be found at www.amazon.de.

6.1. Downloading the Hama Smart Audio App

Note

The following operating systems aresupported:

•iOS 8orhigher

•Android 4.4.2 or higher

• Open the iTunes AppStoreorGoogle Play Storeonyour

smartphone.

• Use the search term "Hama Smart Audio".

• Download the App as normal and install it on your

smartphone. To do this, follow the instructions on your

smartphone.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama SIRIUM2000AMBT Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hama SIRIUM2000AMBT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info