Bedienungsanleitung Hama Soundcup-Z (Seite 4 von 57) (Alle Sprachen)

723768

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

• Make surethat your

Bluetooth

capable terminal device is on and

Bluetooth

is activated.

• Make surethat the speaker is located within the

Bluetooth

range

of max. 10 metres.

• Switch on the speakers as described in

4.1 Switching the

product on and off.

• An acoustic signal sounds, the buttons begin to light up and the

Function button (1) begins to ash.

• If the device does not automatically start in

Bluetooth

mode,

press the Mode button (2) repeatedly until the acoustic signal for

Bluetooth

mode sounds. The device then automatically searches

for aconnection.

• Open the

Bluetooth

settings on your terminal device and wait

until Hama Soundcup-Z appears in the list of

Bluetooth

devices

found.

• Select Hama Soundcup-Z and wait until the speaker is listed as

connected in the

Bluetooth

settings on your terminal device. An

acoustic signal conrms that connection was successful.

• The Function button (1), which was previously ashing, is now

constantly lit blue.

Note –

Bluetooth

password

• Some terminal devices requireapasswordinorder to connect

to another

Bluetooth

device.

• If your terminal device requests apasswordfor connection to

the speaker,enter 0000.

Note

• The speaker always stores the last eight terminal devices paired.

• The speaker will automatically connect to the last terminal

device paired when it is switched on the next time.

4.5 Automatic

Bluetooth

connection (after successful

pairing)

• Make surethat your

Bluetooth

capable terminal device is on and

Bluetooth

is activated.

• Make surethat the speaker is located within the

Bluetooth

range

of max. 10 metres.

• Switch on the speakers as described in

4.1 Switching the

product on and off.

• After aconnection has been automatically set up, the Function

button (1), which was previously ashing, is constantly lit blue. An

acoustic signal conrms that connection was successful.

Note –Connection impaired

• After the speaker and terminal device have been paired, a

connection is established automatically.Ifthe

Bluetooth

connection is not established automatically,check the

following:

• Check the

Bluetooth

settings of your terminal device to see

whether Hama Soundcup-Z is connected. If not, repeat the

steps listed under

Bluetooth

pairing.

• Check whether your terminal device and the speaker areless

than 10 metres apart. If not, move them closer together.

• Check whether obstacles areimpairing the range. If so, move

the devices closer together.

• Check whether the audio cable is connected to the speaker.If

so, disconnect it.

4.6 Audio playback (via

Bluetooth

)

Start and control audio playback on the connected terminal device

accordingly.Alternatively,audio playback can also be controlled on

the speaker (if the connected device supports this function).

• Press the

function button (1) to start or pause audio playback.

• Hold the Plus button (3) to play the next track. Hold the Minus

button (4) to play the previous track.

• Brieypress the Plus button (3) to increase the volume. Brieypress

the Minus button (4) to reduce the volume.

4.7 Audio playback (via microSD card)

It is also possible to start audio playback directly from amicroSD card.

Forthis purpose, insert amicroSD cardcontaining your audio les into

the microSD cardslot (8).

• If the device does not automatically start in microSD mode, press

the Mode button (2) repeatedly until the acoustic signal for microSD

mode sounds.

Youselect tracks and control the volume in this mode just as

described in point 4.6, Audio playback (via

Bluetooth

4.8 Audio playback (via USB device)

It is also possible to start audio playback directly from aUSB data

medium (for example, USB stick).

Forthis purpose, insert aUSB data medium containing your audio

les into the slot for USB devices (10).

• If the device does not automatically start in USB mode, press the

Mode button (2) repeatedly until the acoustic signal for USB mode

sounds.

Youselect tracks and control the volume in this mode just as

described in point 4.6, Audio playback (via

Bluetooth

4.9 Hands-free function

Youcan use the speaker as ahands-free set for your mobile phone.

Forthis function, the mobile phone must be connected to the speaker

via

Bluetooth

• Press the function button

(1) once to answer an incoming call.

• Hold down the ‘M’ button (2) to reject the incoming call.

• During atelephone call, press the Function button (1) once to

end the call.

Note –Call quality

To increase the call quality,make surethat you arenear the

speaker with your mobile phone during the call.

5. Control of the LED lighting

• The Lighting button (5) allows you to change the colour of the LED

lighting (11).

• Brieypress the Lighting button (5) to switch to the next colour

setting.

• With the last colour setting, the LED lighting automatically switches

to the music's bass and pulsates.

• Forthis effect to come into its own, aminimum volume of 30% is

required.

6. Care and Maintenance

•Only clean this product with aslightly damp, lint-free cloth and do

not use aggressive cleaning agents.

7. Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty

for damage resulting from improper installation/mounting, improper

use of the product or from failuretoobserve the operating instructions

and/or safety notes.

8. Service and Support

Please contact Hama Product Consulting if you have any questions

about this product.

Hotline: +49 9091 502-115 (German/English)

Further support information can be found here: www.hama.com

Hama Soundcup-Z Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info