Bedienungsanleitung Hama SW01M (Seite 8 von 10) (Englisch)

723758

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

7.Volume control

Turn the [STANDBY/VOLUME] rotary control (2) to the left/

right to decrease/increase the volume.

The playback volume level is visualised through the volume

status LED/light ring (3).

8.Ambient lighting

Note

In order to use the ambient lighting, the subwoofer

must be on. (See Section 5)

• Move the [LED] switch (7) to the ON position to switch

on the ambient lighting (15).

• Move the [LED] switch (7) to the OFF position to switch

off the ambient lighting (15).

9. Setting crossover frequency

Note

• Set the frequency range in order to adjust the

subwoofer to the room acoustics or terminal devices

(for example, AV receiver).

• The subwoofer then reproduces only the frequencies

of the selected frequency range. Frequencies outside

the range are ltered out.

• Turn the frequency control (4) to set the subwoofer’s

frequency response (20–180 Hz, 20–240 Hz, 20–320 Hz

or 20–420 Hz).

10. Connection via Auxiliary Input

Youcan use the analogue audio input (AUX) to connect

mobile devices (for example, smartphone, tablet PC, MP3

player,etc.) as well as older analogue sources (CD/DVD

player etc.) to the subwoofer and play their audio signals

using the subwoofer.

Note

• Switch off the subwoofer beforeconnecting a

terminal device.

• Do not bend or crush the cable.

• Connect your terminal device to the AUX socket (9) on

the subwoofer using a3.5-mm audio cable (jack cable).

• Activate the Auxiliary Input mode by repeatedly pressing

[MODE] (5).

• The Mode status LED (2) is lit green.

11. High Level input (HF IN)

The High Level input allows you to connect your existing

sound system to the subwoofer,inorder to expand a2.0

sound system into a2.1 sound system, for example.

Note

• Switch off the subwoofer beforeconnecting aterminal

device.

• Do not bend or crush the cable.

• Connect your terminal device to the HF IN socket (11) on

the subwoofer using a3.5-mm RCAcable.

• Activate the HF IN mode by repeatedly pressing [MODE]

(5).

• The Mode status LED (2) is lit blue.

12. Low Level input (LF IN)

The LowLevel input allows you to connect an amplier

with subwoofer output to the subwoofer,for example.

Note

• Switch off the subwoofer beforeconnecting aterminal

device.

• Do not bend or crush the cable.

• Connect your terminal device to the LF IN socket (12) on

the subwoofer using a3.5-mm RCAcable.

• Activate the LF IN mode by repeatedly pressing [MODE]

(5).

• The Mode status LED (2) is lit yellow.

13. Multiroom

The subwoofer can be integrated as aclient into an

UNDOK Multi-room group.

Moredetailed information can be found in the UNDOK

Guide.

14. Factory settings

To reset the subwoofer to the factory

default settings, proceed as

follows:

Press and hold the [RESET] button (6) for approximately 3

seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama SW01M Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hama SW01M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info