Bedienungsanleitung Hama WDS300 - 87687 (Seite 7 von 25) (Deutsch, Englisch, Holländisch, Französisch, Polnisch)

607449

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

• After the installation is complete, run the program by double clicking the desktop “4-DAY FORECAST” icon. Then click [SETTING…]

in the HOME WEATHER display. Click [SET LOCATION] to enter your home city in the program.

• After setting your home location, 4-day forecast of your home city will be updated on your PC program automatically via the Internet. You may click

[UPDATE FORECAST] anytime to manually update the forecast display on the program. The program will also update the forecast and send to the main

unit automatically if your PC is online all the time or every time you turn on your PC.

NOTE: Refer to “Troubleshooting” section if you have any problems displaying the 4-day forecast information on your PC program.

Establish RF connection with main unit

• Before setting up the RF connection, please ensure that you have successfully received 4-day forecast on your PC program for your home city.

• Place the USB transmitter & main unit away from metal & source of interference such as PC monitor, mobile phones, appliances, TV etc. It is

recommended to start with a short distance (eg. within 0.5 meter) between the two units for initial RF setup. Once the RF connection is established, place

the main unit within the effective transmission range from the transmitter. Shorten the distance if necessary for best reception.

• To search for RF signal from a new USB transmitter, press [PC SEARCH] button on the main unit repeatedly until the RF icon ﬂ ashes.

• Press [TRANSMIT] button on the USB transmitter to enforce transmitting RF weather data to the main unit

• Once the RF connection is established between the main unit & USB transmitter, the RF icon with full strength will appear on the main unit. In the ﬁ rst

few minutes of the RF reception, the main unit is showing data on one part of the screen and this is normal. The rest of the screen display data will gradu

ally appear in the next 10 minutes or more.

NOTE:

• If you have waited half an hour or more without seeing the rest of the screen, shorten the distance between the USB transmitter & main unit, check the

battery levels and repeat the setup procedure above

• If it continues to fail, try removing the USB connection and all batteries from the USB transmitter. Reinstall the batteries and then reconnect the USB

connection again. Repeat above procedure to set up the RF connection.

4-Day forecast information

Automatic forecast update

1) After your PC is turned on or rebooted, the PC program will access the Internet server for weather forecast update and start sending data to the main unit

automatically after around 5 to 30 minutes

2) If your PC is turned on all the time with Internet connection, weather forecast will be updated periodically from the Internet and send to the main unit

automatically.

(A) Weather forecast

4-day weather forecast with 28 different weather symbols:

Main unit‘s display

(A) Weather forecast

(B) Hi/Lo TEMP

(D) Chance of precipitation

(E) UVI

(F) WIND

(G) RF Status

(H) Last update

(B) High/Low Temperature forecast

Press [C/F] button to select degree C or F. To view the high & low temperature for the next 3 days, press [MODE] repeatedly until HI & LO icons appear

Average humidity forecast is located next to the RH% icon. To view the average humidity for the next 3 days, press [MODE] repeatedly until “RH%” icon

appears.

(D) Chance of precipitation

The chance of precipitation in term of percentage is displayed next to the “PRECIP” icon. To view the precipitation forecast for the next 3 days, press

[MODE] repeatedly until “PRECIP” icon appears.

(E) Maximum UV Index forecast

The maximum UV index forecast is located next to the “UVI” icon. To view the maximum UV forecast for the next 3 days, press [MODE] repeatedly until

“UVI” icon appears.

UVI 1 to 2: Maximum UV level is low. Low danger to the average person

UVI 3 to 5: Maximum UV level is moderate. Moderate risk of harm from unprotected sun exposure

UVI 6 to 7: Maximum UV level is high. High risk of harm from unprotected sun exposure

UVI 8 to 10: Maximum UV level is very high. Very high risk of harm from unprotected sun exposure

UVI 11 to 15: Maximum UV level is extreme. Extreme risk of harm from unprotected sun exposure

Restart the installation program

(NIS01_INSTALL.EXE or INSTALL.EXE) again!

partly cloudy with

snow showers

partly cloudy with

thunderstorms

mostly cloudy

mostly cloudy with

light rain

mostly cloudy with

light sleet

mostly cloudy with

light snow

mostly cloudy with

showers

clear

partly cloudy

partly cloudy with

light rain

partly cloudy with

light sleet

partly cloudy with

light snow

partly cloudy with

showers

partly cloudy with

sleet showers

PC Program Main Unit Description

(G)

(B)

(A)

today‘s

forecast

(H)

next 3 day‘s forecast

(A)

(B) or

(F) + (D) or (E) + (C)

(D)

(F)

(E)

(C)

overcast with showers

overcast with sleet showers

overcast with snow showers

overcast with rain

overcast with sleet

overcast with snow

overcast with

thunderstorms

overcast

overcast with light rain

mostly cloudy with

sleet showers

mostly cloudy with

snow showers

mostly cloudy with

thunderstorms

overcast with light sleet

overcast with light snow

Hama WDS300 - 87687 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info