Bedienungsanleitung Hamilton 2826 (Seite 4 von 83) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

563551

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

6 © HAMILTON 14/01/2013 INSTRUCTION MANUAL 7

3. Operating instructions 3. Operating instructions

Using the chronograph

Start-Stop function

Timing a single event:

 Press button A: the chronograph starts.

. Press button A: the chronograph stops.

 Press button B to reset to zero.

Note: Before you start timing, the hands should be reset

to zero. If necessary, press button B.

Cumulative time function

This measures successive times. Each result is added

to the previous one.

 Press button A: the chronograph starts.

. Press button

A again: the chronograph stops.

Repeat these two steps as many times as desired. At the

end of the last measurement, the chronograph displays

the total of all the times measured. Press button B to

reset to zero.

Split-time function (intermediate times)

This function allows the display and reading of mul-

tiple successive times measured from the same start-

ing point. The time taken to read the amounts can be

caught up on without disturbing the measurement of

total elapsed time.

 Press button A: the chronograph starts.

. Press button B to read the rst intermediate time.

 Press button

again. The chronograph hands catch

up with the time elapsed since the beginning of the

measurement.

 Similarly, press button B again to read a further inter-

mediate time, and once again to cause the hands to

catch up.

 At the end of the whole measurement, press button

A to read the total time.

 Press button B to reset to zero.

NB: The maximum catch-up time is  minutes.

. Mechanical watch

Mechanical movement. The most traditional of move-

ments in watchmaking is the mechanical one. To en-

sure that the watch does not stop, it must be wound

regularly – once a day.



Setting the time

 Pull out the crown

C completely to position (p).

. Set the time by turning the crown in the desired

direction.

 Push the crown back in completely to position (p):

the seconds hand starts again, allowing perfect syn-

chronization with a time signal.

Caliber -

Setting the time

 Pull out the crown

completely to position (p): the

seconds hand stops.

. Set the time by turning the crown in the desired

direction.

 Push the crown back in completely to position (p):

the seconds hand starts again, allowing perfect syn-

chronization with a time signal.

Setting the date

 Pull out the crown

C to position (p).

. Turn the crown clockwise to set the date.

 Push the crown back in completely to position (p).

. Automatic watch

Automatic movement. The mechanism of the watch

includes an oscillating rotor that winds the mainspring

via the motion of your wrist. The running reserve is ap-

proximately  hours ( hours for the caliber H- and

H-). If necessary, the watch may be rewound manually.

With most of our models, the beauty of the inner work-

ing of the watch movement can be admired through

the transparent case back.





Setting the time

 Pull out the crown

completely to position (p): the

seconds hand stops*.

. Set the time by turning the crown in the desired

direction.

 Push the crown back in completely to position (p):

the seconds hand starts again, allowing perfect syn-

chronization with a time signal.

* stop seconds according to model

Setting the date and the day

 Pull out the crown

C to position (p).

. Turn the crown clockwise to set the date and coun-

terclockwise to display the desired day.

 Push the crown back in completely to position (p).

. Automatic chronograph watch



Setting the time

 Pull out the crown

completely to position (p): the

seconds hand stops.

. Set the time by turning the crown in the desired

direction.

 Push the crown back in completely to position (p):

the seconds hand starts again, allowing perfect syn-

chronization with a time signal.

Setting the date and the day

 Pull out the crown C to position (p).

. Turn the crown clockwise to set the date and coun-

terclockwise to display the desired day.

 Push the crown back in completely to position (p).

Note: Rapid date and day correction is not possible be-

tween  p.m. and  a.m.



Setting the time

 Pull out the crown

completely to position (p): the

seconds hand stops.

. Set the time by turning the crown in the desired

direction.

 Push the crown back in completely to position (p):

the seconds hand starts again, allowing perfect syn-

chronization with a time signal.

Setting the date

Set the date* by pressing button D. The date changes

at each press.

* date correction is not possible between . p.m.

and  p.m.

Hamilton 2826 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info