Page 18 BK745
Hamlet Soluon Inset (S4) Stove User Guide
6.6 Smoke Control Area (The Clean Air Act 1993 & Smoke Control Areas)
If the stove is to be installed in a designated Smoke Control Area (further
information can be found via https://www.gov.uk/smoke-control-area-rules) then the
installer will have fitted the a restrictor screw for the secondary air lever to prevent
total closure of this air control.
NOTE :
The minimum air control setting is governed in manufacture to meet the
requirements of Smoke Control exemption and as a result the appliance will
NOT shut down completely when in the minimum air position setting.
Removal or modification of the fitted air control fixing (See Fig. 5) is illegal
when the appliance is installed in a smoke exemption area and doing so may
result in prosecution and fine.
6.7 Typical burn for nominal output
To perform the most efficient burn at the nominal rated output please consult the
specification table at the rear of this manual. Please note, many factors can effect
the nominal output, so the stated weights of fuel (Seasoned hard wood, Beech and
Mineral solid fuel, ‘Maxibrite’) are a guide, which is a representation to laboratory
test burn conditions.
Restrictor Screw
(Smoke Exemption)
Fig. 5. Fitted Smoke Exemption Restrictor Screw
Secondary
Air Control
