Page 22 BK745
Hamlet Soluon Inset (S4) Stove User Guide
7.7 Replacement parts
Genuine replacement spare parts can be obtained from your Hamlet stoves retailer /
dealer.
You can find a complete list of spares and consumables such as liners, replacement grate
parts and throat plates as well as items to enhance its visual appearance and efficiency
such as stove paint and rope kits.
It is worth noting that the fitting of non-official parts to your stove will invalidate its
guarantee.
7.8 Classification
All Solution Inset S4 stoves are classed as intermittent operation. There by meaning, to
give nominal rated output, you will have to refuel a minimum of 45min for wood or 1hr for
solid fuel, as stated in EN 13240:2011 +A2:2004.
7.9 Adverse weather conditions
If due to adverse weather conditions your stove does not operate correctly and causes the
stove to emit smoke, do not treat it as a nuisance, this smoke will indicate that carbon
monoxide is being emitted into the room. Extinguish the stove by reducing the firing rate,
open windows and allow the stove’s fuel to burn out before closing the windows.
The probable cause is insufficient draw, check flue ways and have the chimney tested for
flue pressure.
7.10 Door glass
The door glass should remain clear during normal burning. However under certain
conditions, such as burning at a low or slow rate, using damp wood or overnight burning,
the glass may become somewhat blackened. To remedy this, operate the appliance at a
fast rate. Alternatively when the stove is cold, open the door and clean the inside face of
the glass with a damp cloth or with glass cleaner.
7.11 Fire door handle
Care must be taken when opening and closing the fire door as any surrounding surfaces
will be VERY HOT.
ALWAYS USE THE STOVE HOT GLOVES WHEN USING THE FIRE DOOR /
RIDDLE HANDLE— RISK OF PERSONAL INJURY MAY OCCUR.
CAUTION MUST BE GIVEN WHEN RE-FUELLING THE APPLIANCE, KEEP
THE STOVE HOT GLOVE AWAY FROM NAKED FLAMES & SPARKS.
