Bedienungsanleitung Hammond Leslie 525 (Seite 6 von 12) (Englisch)

495106

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Installing two 525 or 3301 Leslies with 11-pin Leslie cable assembly

1. Place your Leslie 525 or 3301 speakers in a location that produces the best sound reproduction.

2. Review the position of your organ or keyboard and determine the best method of routing the optional

Leslie cable assemblies.

3. Plug the male end of the optional 11-pin stereo Leslie “Y” adapter into the 11-pin Leslie connector on the

back of your organ or keyboard.

4. Connect the male end of an optional 11-pin Leslie cable assembly into the left-channel Leslie connector

on the 11-pin stereo “Y” adapter. Connect the other end of the 11-pin Leslie cable assembly to the Leslie

525 or 3301 which will be used for the left-channel audio.

5. Connect the male end of another 11-pin Leslie cable assembly into the right-channel Leslie connector on

the 11-pin stereo “Y” adapter. Connect the other end of the 11-pin Leslie cable assembly to the Leslie 525

or 3301 which will be used for the right-channel audio.

6. Plug the AC power cords from the Leslies into a 120V AC outlet.

7. Turn the Master volume controls on the Leslies (see page 3) to the fully counterclockwise position. Set

the bass and treble controls to the mid-position.

8. If you are connecting a Hammond organ to your Leslie, pull all the upper and lower drawbars including

the pedal drawbar fully out (#9 positions). Set the expression pedal to the loudest position (fully

depressed). For non-Hammond products, set the volume control to the loudest position and set the voice

registration to a setting that provides maximum sound (i.e. Full organ).

9. Turn on the power switch on your organ or keyboard product. For organs, play a three-note chord on the

upper and lower manuals and depress the low “C” pedal. For keyboards, place the unit in the split

keyboard mode and play a three-note chord on the upper manual and the low ”C” pedal note. Have

someone slowly turn the volume control clockwise on one of the Leslies until the sound begins to

distort, then slowly decrease the volume (turn the control counterclockwise) until the sound is undistorted.

Your volume control is now properly set. Repeat this procedure for the other Leslie speaker.

This Setup procedure should be followed when connecting a stereo organ or keyboard equipped with an

11-pin Leslie connector to two Leslie 525s or 3301s. This installation provides true stereo imaging by

providing left and right audio channels. The purchase of an optional 11-pin stereo Leslie “Y” adapter and

two Leslie cable assemblies from your local Leslie dealer is required to complete this installation.

Caution: Do not play your Leslie at a volume setting that produces a distorted sound. Severe damage

may occur to your new Leslie if played in this condition for an extended period of time.

Leslie 525 or 3301

Organ or Keyboard product

11-pin Leslie cable assembly 11-pin Leslie cable assembly

11-pin stereo Leslie

“Y” adapter

OWNERS MANUAL Models 525, 3301

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hammond Leslie 525 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info