Bedienungsanleitung Hammond XE-1 (Seite 28 von 213) (Holländisch)

626612

Zoom out

Zoom in

Vorherige Seite

1/213

Nächste Seite

Information Center Display

HA<O> Model XE-1 Basic Features Guide

Five (5) choices should now appear in the display window.

Touching a numbered Select Touch Button will enter the Information Center Display into an

Advanced Feature selection.

MIDI - Allows you to set the overall MIDI parameters for the instrument, including MIDI Channels informa-

tion, MIDI Program information and MIDI Controller information, and allows you to perform a MIDI Data

Dump to a MIDI data recorder or to another XE-1. Touch either the Number 1 or Number 2 Select Touch

Button to control this Advanced Feature.

SEQUENCER - Allows you to program the Sequencer the way that you prefer. Touch either the Number 3

or Number 4 Select Touch Button to control this Advanced Feature.

CONTROL - Allows you to set the Upper and Lower limits of the Pitch Wheel for Upper and Lower

Keyboards and Pedal Keyboard, and allows you to set the characteristics for the Modulation Wheel.

Touch either the Number 5 or Number 6 Select Touch Button to control this Advanced Feature.

DISK UTILITY - Allows you to perform various operations using the Disk Drive. Touch either the Number

9 or Number 10 Select Touch Button to control this Advanced Feature.

SYSTEM - Allows you to change certain characteristics which affect the entire instrument. Touch either

the Number 11 or Number 12 Select Touch Button to control this Advanced Feature.

NOTE: When using the Information Center Display to access Advanced Features, you may notice an

arrow and numbers such as “½,” “1/4,” etc., in the upper left-hand corner of the display. This indicates

that the selected Advanced Feature Menu has more than one screen. In this case, the different

selections are accessed by touching the PAGE UP or PAGE DOWN Select Touch Buttons.

Touch the PAGE UP Select Touch Button again and Page 1 will reappear.

♦ “Shortcuts”

Sometimes it may be desirable to access an Advanced Feature more quickly than can be done

by using the Touch Buttons on the Information Center Display. Because of this, your Hammond

XE-1 has what are called “Shortcuts” to many Advanced Feature Menus. You can “shortcut” to

an Advanced Feature associated with a particular function by pressing and holding a Touch Tab

controlling that function.

Many, but not all, of the Advanced Features can be accessed via Shortcuts. In addition, a few

Advanced Feature Menus can be accessed only via a Shortcut. The different methods you can

use to access a particular Advanced Feature Menu will be explained in each section before

explaining the Advanced Feature Menu itself.

“Shortcut” Touch Tabs

In order to make playing the XE-1 even easier, there is a group of four Touch Tabs located to the

left of the RHYTHMS & STYLES Touch Tab group which allow you to Shortcut

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hammond XE-1 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info