Extra care must be taken to avoid short circuiting, contact a metal conductor to the
battery terminals.
Special attention must be paid to avoid modification, restoration, inserting foreign
bodies into the battery, exposing the battery to water or other liquids, fire,
explosion, and other risks.
Do not allow children to handle the battery unsupervised. .
Used batteries must be disposed of in accordance with local regulations.
Do not burn the battery.
If the battery has been swallowed, immediately contact a doctor.
If the battery leaks, be careful not to allow the fluid to come into contact with skin
or eyes. If battery fluid comes into contact with skin or eyes, rinse using plenty of
water and seek immediate medical advice.
If you suspect damage to the device or the battery, contact Handheld.
Cleaning
Cleaning the exterior
Use only detergents or cleaners dedicated for computers.
Screen
Use only detergents or cleaners dedicated for computers. Take care not to allow any
excess liquid to enter the gaps around the screen. To avoid scratches, wipe using a non-
abrasive dry cloth.
Scanner Window
Clean regularly using a lens cleaner.
Connectors
1. Remove the battery
2. Soak the end of a swab with isopropyl alcohol and rub across the connector
pins.
3. Be careful as to not leave any residue on the connectors.
4. This process should be repeated approximately three times.
If isopropyl alcohol is not available, use computer cleaning detergent or a pencil eraser
(rubber) taking care not to leave any foreign bodies at the pins.
Cradle
1. Remove the power cable from the cradle.
2. Soak the end of a swab with isopropyl alcohol and rub across the connector
pins.
3. Be careful as to not leave any residue on the connectors.
4. Rub the connectors carefully ensuring that both sides of the connectors are fully
cleaned; repeat three times.
5. Remove any foreign bodies inside the cradle using compressed air or similar.
6. Clean the exterior using computer cleaning detergents.
