711519
53
Zoom out
Zoom in
Vorherige Seite
1/70
Nächste Seite
Page EN-17
Dishwasher operation
Preparation
Requirements:
You have read chapter „Safety“ on page
EN-6 and understand all the safety notices.
The appliance is set up and connected as
described in chapter „Installation, connec-
tion and commissioning“ on page EN-23.
Dishwasher detergents, rinse aids and
dishwasher salts and multitabs are added.
1. Open the tap completely.
2. Close the dishwasher door.
3. Press the
button (18) to switch on the
dishwasher.
4. You will hear a signal tone and all LEDs
will illuminate briefly.
After a short time, the programme display
reading ECO (1) will show.
Selecting the dishwasher
programme
It is recommended that you carry out
a test run before the rst dishwasher
cycle in order to remove residues from
the manufacturing process and in order to
ensure that the appliance functions perfectly.
Carry out this test run when the dishwasher
is empty and without any dishwasher deter-
gent.
1. Select the suitable dishwashing pro-
gramme based on the “dishwasher pro-
gramme table”, see page EN-16.
(13)(6)
(1)
2. Press the P (13) button as often as re-
quired until the display shows the desired
programme symbol (1) and the pro-
gramme duration (6).
3. For the washing programme,
if you wish to make further adjustments,
continue with „Additional options“.
launch it, continue with „Starting the
dishwashing programme“ on page EN-18.
Additional options
You can combine the various dishwashing
programmes with additional options. The
additional options must be selected before
starting the wash programme.
Intensive cleaning
(7)(17)
This option allows you to fur-
ther improve the cleaning results.
This option is not available with the pro-
grammes
, and .
To switch the option
on, press the button
(17).
In the display, the symbol (7) will light
up.
off, press the button again. The symbol
will disappear in the display.
Dishwasher operation
53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hanseatic WQP8-T7636E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info