Bedienungsanleitung Harman Kardon 37 (Seite 16 von 40) (Englisch)

34816

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

16 SETUP AND CONNECTIONS

SETUP AND CONNECTIONS

One of the major advantages of the DVD format is its

ability to use a variety of digital audio formats for the

ultimate in sonic performance. However, in order to

njoy the benefits of digital audio, you must use a

receiver or processor that has digital audio decoding

capabilities and make an optical or coaxial digital audio

connection between the DVD 37 and your home the-

ater system. This simple connection is made as shown

below with an optional coax or optical cable. Only one

of these connections is required, and both should not

be made at the same time.

n order to take advantage of the high-resolution

DVD-Audio output of the DVD 37, you must connect

the

6-Channel Audio Outputs 9 to the matching

6-channel inputs on your receiver or processor. Only

compressed PCM, Dolby Digital or DTS tracks that

may be present on the disc may be listened to using

the digital audio outputs. Thus, the DVD 37 decodes

the digital signal and outputs separate signals for each

channel: front left, center, front right, surround right,

surround left and low-frequency effects (LFE).

NOTES FOR ANALOG AUDIO:

• If you wish to use the DVD 37 as the input for a

multiroom system, the

Analog Audio Outputs ª

should be connected to the standard analog left/

right DVD or CD inputs on your digital receiver or

processor.

• The connection from the

Analog Audio Outputs

ª to the TV is optional. If you plan on occasionally

using your DVD 37 alone, without turning on your

complete system,

this connection must be made.

• When the audio signal is to be fed to an analog

receiver rather than to the TV, connect the

Analog

Audio Outputs

ª to any analog audio inputs on

our receiver or processor. The DVD 37 will “down-

mix” multichannel recordings to two channels.

• The analog audio connection should also be made

if you wish to play high-resolution 96kHz PCM

audio discs where your receiver does not support

96kHz processing.

• In each of these four cases in which the

Analog

udio Outputs

ª a

re used, set the bass manage-

ment line of the

AUDIO SETUP menu to

STEREO.

NOTES ON VIDEO:

• With multiple video sources, your audio/video

receiver can be used for selecting the video signal

and routing it to the TV. Connect the

HDMI 2,

Component ∞, Composite § or S-Video ¶

output of the DVD 37 to the correct video input on

your receiver, and the video outputs of the receiver

to your TV. For more details, see the manual for your

audio/video receiver.

• If your receiver has only DVI inputs, you may use an

optional HDMI-to-DVI cable or adapter for the con-

nection to the receiver. In addition, the video display

used with your system must be HDCP-compatible in

order to take advantage of the HDMI output, whether

it is used with HDMI or DVI connections.

Connecting to a Receiver

When using the DVD 37 with an audio/video receiver

or processor

, connect it as follows. First, make one

of the video connections (Composite Video ç,

S-Video ∂, Component Video é or HDMI ˙)

to the video input jacks on the A/V receiver, and

hen connect the receiver’s video monitor output

to the TV. If you will sometimes use the TV without

the audio component, you may optionally make the

Analog Audio Connection ∫ to the TV. In addition,

to benefit from the high-resolution surround sound for-

mats recorded on DVD-Audio discs, which are not out-

put via the HDMI connection, you will need to make

the 6-Channel Audio Connection å to your receiver

or processor.

Second, if your receiver or processor is not HDMI-

capable, make either the

Optical Digital Audio

Connection

ƒ,

to the receiver or processor.

Remember that when the HDMI connection is used

with a receiver or processor that is compliant with the

HDMI format, a single connection suffices for both

audio and video, except for DVD-Audio discs, as

noted. If your receiver or processor is not capable of

processing the HDMI audio signal, then a

separate

audio connection is required. If your receiver/

processor

has multiroom capability, you may also connect the

DVD 37’s analog audio outputs to the DVD analog

audio inputs on the receiver.

IMPORTANT NOTE: Make certain that any device

being connected, including the DVD 37, your receiver

or processor and your TV or video display, is turned off

whenever you make connections between products.

When using the

HDMI é connection, turn on your

system components in this order: 1) television or video

display, 2) receiver or processor, and 3) DVD 37.

éƒ©˙ ∂ ç ∫ å

To Y (green)/

Pb (blue)/

Pr (red)

component

video

connectors

To S-video

input

connectors

To coaxial

digital

audio

input

connectors

To optical

digital

audio

input

connectors

To analog audio

input connectors

(red/white)

on the TV

or receiver

(see above)

To 6-channel

analog audio

inputs on

receiver

To video

input

connectors

(yellow)

To power outlet

(AC 120V/60Hz)

Dolby Digital/DTS A/V Receiver or Processor

Front Speakers

(Left/Right)

Surround Speakers

(Left/Right)

Center

Speaker

Subwoofer

HDMI, DVI, Component,

S-video and/or

Composite video

monitor outputs

HDMI

or DVI

port

AC INPUT

120V~, 60Hz

13W

Connecting to a Receiver/Amplifier With a Dolby Digital or DTS Decoder

DVD 37 (120V) OM 8/7/06 4:10 PM Page 16

Harman Kardon 37 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon 37

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info