502582
21
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
21 OPERATION
Operation
Basic Operation
Once you have completed the setup and
configuration of the AVR 110, it is simple to
operate and enjoy. The following instructions
will help you maximize the enjoyment of your
new receiver:
Turning the AVR 110 On or Off
When using the AVR 110 for the first time, you
must press the
Main Power Switch
1
on the
front panel to turn the unit on.This places the
unit in a Standby mode, as indicated by the
amber color of the
Power Indicator
3
. Once
the unit is in Standby, you may begin a listening
session by pressing the
System Power Control
2
on the front panel or the AVR Selector
f. Note that the Power Indicator
3
will
turn green.This will turn the unit on and return it
to the input source that was last used.The unit
may also be turned on from Standby by pressing
any of the
Input Selector buttons on the
remote
efg or the Input Source
Selector
button
!
on the front panel.
NOTE: After pressing one of the Input Selector
buttons eg to turn the unit on, press the
AVR Selector f to set the remote control to
the AVR 110 functions.
To turn the unit off at the end of a listening
session, simply press the
System Power
Control
2 on the front panel or the Power
Off
button d on the remote. Power will be
shut off to any equipment plugged into the rear
panel
Switched AC Outlets and the
Power Indicator 3 will turn amber.
When the remote is used to turn the unit off
it is actually placing the system in a Standby
mode, as indicated by the amber color of the
Power Indicator 3.
To program the AVR 110 for automatic turn-
off, press the
Sleep button ion the remote.
Each press of the button will increase the time
before shut down in the following sequence:
The sleep time will be displayed in the
Preset
Number/Sleep Timer Indicator
P and it
will count down until the time has elapsed.
When the programmed sleep time has elapsed,
the unit will automatically turn off. Note that
the front panel display will dim to one half
brightness when the Sleep function is
programmed.To cancel the Sleep function,
press and hold the
Sleep button
i
until
the information display returns to normal
brightness, the Sleep indicator numbers
disappear and the words
SLEEP OFF
appear in the Main Information Display W.
When you will be away from home for an
extended period of time it is always a good
idea to completely turn the unit off with the
front panel
Main Power Switch
1
.
NOTE: All preset memories are lost if the unit is
left turned off by using the
Main Power
Switch
1
for more than two weeks.
Source Selection
To select a source, press any of the Source
Selector
buttons on the remote eg.
The input source may also be changed by
pressing the front-panel
Input Source
Selector
button !. Each press of the button
will move the input selection through the list of
available inputs.
As the input is changed, the AVR 110 will
automatically switch to the digital input (if
selected), surround mode, speaker configura-
tion, output levels, crossover frequency and
night mode status that were entered during the
configuration process for that source.
The front-panel
Video 4 Inputs
%^
may
be used to connect a device such as a video
game or camcorder to your home entertain-
ment system on a temporary basis.
As the input source is changed, the new input
name will appear in the
Main Information
Display
W and a green LED will light next to
the selected inputs name in the front panel
Input Indicators .
When an audio source is selected, the last
video input used remains routed to the
Video
Outputs
bf and Video Monitor Output
. This permits simultaneous viewing and lis-
tening to different sources.
When a Video source is selected, the video sig-
nal for that input will be routed to the
Video
Monitor Output
jack and will be viewable
on a TV monitor connected to the AVR 110.
Volume Control
Adjust the volume to a comfortable level
using the front panel
Volume Control Ó or
remote
Volume Up/Down buttons.
When listening in the Stereo mode with the
surround circuits off, the
Balance Control *
may be used to adjust the relative sound output
between the front left and front right speakers.
To temporarily silence all speaker outputs
press the
Mute button .This will interrupt
the output to all speakers and the headphone
jack, but it will not affect any recording or dub-
bing that may be in progress. When the system
is muted, the
MUTE indicator X will light in
the
Main Information Display Û. Press the
Mute button again to return to normal
operation.
During a listening session you may wish to
adjust the
Bass Control & and Treble
Control
( to suit your listening tastes or
room acoustics.
To set the output of the AVR 110 so that
the output is flat,with the tone controls de-
activated, press the
Tone Mode button 6
button once or twice so that the words
Tone Out appear momentarily in the
Main Information Display W.To return the
tone controls to an active condition, press the
Tone Mode button 6 once or twice so that
the words
Tone In momentarily appear in
the
Main Information Display W.
For private listening, plug the 1/4" stereo
phone plug from a pair of stereo headphones
into the front panel
Headphone jack
4
. Note
that when the headphones plug is connected,
the word
HEADPHONE will scroll once
across the
Main Information Display W
and all speakers will be silenced. When the
headphone plug is removed, the audio feed to
the speakers will be restored.
35
35
33
90
min
80
min
70
min
60
min
50
min
40
min
30
min
20
min
10
min
OFF
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Harman Kardon AVR 110 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info