Bedienungsanleitung Harman Kardon AVR 1510S (Seite 3 von 48) (Englisch)

599833

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

AVR

ENGLISH

Introduction, Supplied Accessories,

Important Safety Information and Place the AVR

Introduction

Thank you for choosing this Harman Kardon product!

For more than ﬁfty years, the Harman Kardon mission has been to share a passion for music

and entertainment, using leading-edge technology to achieve premium performance.

Sidney Harman and Bernard Kardon invented the receiver, a single component designed

to simplify home entertainment without compromising performance. Over the years,

Harman Kardon products have become easier to use, while offering more features and

sounding better than ever.

The AVR 1510S/AVR 151S 5.1-channel digital audio/video receivers (AVRs) continue this

tradition with some of the most advanced audio and video processing capabilities yet,

and a wealth of listening and viewing options.

To obtain the maximum enjoyment from your new AVR, please read this manual and refer

back to it as you become more familiar with its features and their operation.

If you have any questions about this product, its installation or its operation, please

contact your Harman Kardon retailer or custom installer, or visit the Web site at

www.harmankardon.com.

Supplied Accessories

The following accessory items are supplied with your AVR. If any of these items are

missing, please contact your Harman Kardon dealer or Harman Kardon customer service

at www.harmankardon.com.

• System remote control

• AM loop antenna

• FM wire antenna

• Two AAA batteries

• AC power cord (AVR 151S only)

IMPORTANT SAFETY INFORMATION

Verify Line Voltage Before Use

The AVR 1510S has been designed for use with 120-volt alternating current (AC). The AVR

151S has been designed for use with 220 – 240-volt AC. Connection to a line voltage

other than that for which your receiver is intended can create a safety and ﬁre hazard and

may damage the unit. If you have any questions about the voltage requirements for your

speciﬁc model, or about the line voltage in your area, contact your selling dealer before

plugging the unit into a wall outlet.

Do Not Use Extension Cords

To avoid safety hazards, use only the power cord supplied with your unit. We do not

recommend that extension cords be used with this product. As with all electrical devices,

do not run power cords under rugs or carpets, or place heavy objects on them. Damaged

power cords should be replaced immediately by an authorized service center with a cord

meeting factory speciﬁcations.

Handle the AC Power Cord Gently

When disconnecting the power cord from an AC outlet, always pull the plug; never

pull the cord. If you do not intend to use your AVR for any considerable length of time,

disconnect the plug from the AC outlet.

Do Not Open the Cabinet

There are no user-serviceable components inside this product. Opening the cabinet may

present a shock hazard, and any modiﬁcation to the product will void your warranty.

If water or any metal object such as a paper clip, wire or staple accidentally falls inside

the unit, disconnect it from the AC power source immediately, and consult an authorized

service center.

CATV or Antenna Grounding (AVR 1510S)

If an outside antenna or cable system is connected to this product, be certain that it is

grounded so as to provide some protection against voltage surges and static charges.

Section 810 of the United States National Electrical Code, ANSI/NFPA No. 70-1984,

provides information with respect to proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding

conductors, location of antenna discharge unit, connection to grounding electrodes and

requirements of the grounding electrode.

NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV (cable TV)

system installer’s attention to article 820-40 of the NEC, which provides guidelines for

proper grounding and, in particular, speciﬁes that the cable ground shall be connected

to the grounding system of the building, as close to the point of cable entry as possible.

Place the AVR

• Place the AVR on a ﬁrm and level surface. Be certain that the surface and any

mounting hardware can support the AVR’s weight.

• Provide proper space above and below the AVR for ventilation. Recommended

clearance distances are 30cm above the unit, 30cm behind the unit and 30cm on

each side of the unit.

• If you install the AVR in a cabinet or other enclosed area, provide cooling air within

the cabinet. Under some circumstances, a fan may be required.

• Do not obstruct the ventilation slots on the top of the AVR or place objects directly

over them.

• Do not place the AVR directly on a carpeted surface.

• Do not place the AVR in moist or humid locations, in extremely hot or cold locations,

in areas near heaters or heat registers, or in direct sunlight.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR 1510S Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR 1510S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info