Bedienungsanleitung Harman Kardon AVR 1710S (Seite 29 von 52) (Englisch)

599835

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

AVR

ENGLISH

Operating Your AVR and

Advanced Functions

Playing Media from a Roku Streaming Stick

When you connect a Roku Streaming Stick to the AVR’s MHL/HDMI input and join it

with your home Wi-Fi network, you can use the AVR’s remote to search for and control

streaming media. NOTE: Your home network must be Wi-Fi for you to be able to use the

Roku Streaming Stick with your AVR.

1. After connecting the Roku Streaming Stick to the AVR’s MHL/HDMI input, select the

AVR’s MHL source. The Roku Streaming Stick’s video output should be displayed on

your TV.

2. Follow the Roku instructions for joining the Roku Streaming Stick with your Wi-Fi

network, using the Roku remote.

3. Once the Roku Streaming Stick is joined with your Wi-Fi network, the AVR remote

buttons shown below will perform the same functions as their counterparts on the

Roku remote:

Home Menu

Navigation

Menu Item

Selection

MHL Source

Button

Listening to Media via Spotify Connect

Your Harman Kardon AVR and Spotify control device need to be on the same wi-ﬁ network

to work.

From the Spotify App on your mobile device tap on the Now Playing bar to reveal extra

controls, and select the Speaker icon. From the Connect screen, just choose your AVR

models from the list as a destination device and it’ll start playing. Adjust the volume

directly from the app using the volume bar from the Connect screen.

Using This Device With Spotify Connect

Spotify lets you listen to millions of songs – the artists you love, the latest hits and

discoveries just for you.

If you are a Spotify user, you can control this device using your Spotify app.

Step 1 Connect your device to the same wifi network as your phone, tablet or PC

running the Spotify app.

Step 2 Open the Spotify app, and play any song.

Step 3 Tap the song image in the bottom left of the screen.

Step 4 Tap the Connect icon

Step 5 Pick your speaker from the list.

For information on how to set up and use Spotify Connect please visit www.spotify.

com/connect

Licenses

The Spotify Software is subject to third party licenses found here : www.spotify.com/

connect/third--party- -licenses.

Advanced Functions

Much of the adjusting and conﬁguration your AVR requires is handled automatically, with

little intervention required on your part. You can also customize your AVR to suit your

system and your tastes. In this section we will describe some of the more advanced

adjustments available to you.

Audio Processing and Surround Sound

Audio signals can be encoded in a variety of formats that can affect not only the quality

of the sound but the number of speaker channels and the surround mode. You may also

manually select a different surround mode, when available.

Analog Audio Signals

Analog audio signals usually consist of two channels – left and right. Your AVR is able

to process two-channel audio signals to produce multichannel surround sound, even

when no surround sound has been encoded in the recording. Among the available

modes are the Dolby Pro Logic II/IIx/IIz, Virtual Speaker, DTS Neo:6, HARMAN NSP,

5 CH and 7 CH Stereo modes. To select one of these modes, press the Surround

Modes button.

Digital Audio Signals

Digital audio signals offer greater ﬂexibility and capacity than analog signals, and

allow the encoding of discrete channel information directly into the signal. The result is

improved sound quality and startling directionality, since each channel’s information is

transmitted discretely. High-resolution recordings sound extraordinarily distortion-free,

especially in the high frequencies.

Surround Modes

Surround-mode selection depends upon the format of the incoming audio signal as well

as your personal taste. Although there is never a time when all of the AVR’s surround

modes are available, there is usually a wide variety of modes available for a given input.

Table A12 in the Appendix, on page 47, offers a brief description of each mode and

indicates the types of incoming signals or digital bitstreams the mode may be used with.

Additional information about the Dolby and DTS modes is available on the companies’

Web sites: www.dolby.com and www.dtsonline.com.

When in doubt, check the jacket of your disc for more information on which surround

modes are available. Usually, nonessential sections of the disc, such as trailers, extra

materials or the disc menu, are available only in Dolby Digital 2.0 (two-channel) or

PCM two-channel mode. If the main title is playing and the display shows one of these

surround modes, look for an audio or language setup section in the disc’s menu. Also,

make sure your disc player’s audio output is set to the original bitstream rather than two-

channel PCM. Stop play and check the player’s output setting.

Multichannel digital recordings are produced in ﬁve-channel, six-channel or seven-

channel formats, with or without a “.1” channel. The channels included in a typical

5.1-channel recording are front left, front right, center, surround left, surround right and

LFE (low-frequency effects). The LFE channel is denoted as “.1” to represent the fact that

it is limited to the low frequencies. 6.1-channel recordings add a single surround back

channel, and 7.1-channel recordings add surround back left and surround back right

channels to the 5.1-channel conﬁguration. New formats are available in 7.1-channel

conﬁgurations. Your AVR is able to play the new audio formats, delivering a more exciting

home theater experience.

AVR 1710S/AVR 171S only: To use the 6.1- and 7.1-channel surround modes, the

surround back channels must be enabled. See Manual Speaker Setup, on page 30 for

more information.

Digital formats include Dolby Digital 2.0 (two channels only), Dolby Digital 5.1, Dolby

Digital EX (6.1), Dolby Digital Plus (7.1), Dolby TrueHD (7.1), DTS-HD High-Resolution

Audio (7.1), DTS-HD Master Audio (7.1), DTS 5.1, DTS-ES (6.1 Matrix and Discrete),

DTS 96/24 (5.1), two-channel PCM modes in 32kHz, 44.1kHz, 48kHz, 88.1kHz, 96kHz,

176.4kHz or 192kHz, and 5.1 or 7.1 multichannel PCM.

When the AVR receives a digital signal, it detects the encoding method and the number

of channels, which is displayed brieﬂy as three numbers, separated by slashes (e.g.,

“3/2/.1”).

Harman Kardon AVR 1710S Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR 1710S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info