Bedienungsanleitung Harman Kardon AVR 1710S (Seite 33 von 52) (Englisch)

599835

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

AVR

ENGLISH

Advanced Functions

Notes on Setting Speaker Volumes in Home Theater Systems:

While setting your system’s individual speaker volume levels is ultimately up to your

personal taste, here are some ideas you may ﬁnd helpful:

• For ﬁlms and video-music programs, your overall goal should be to create an

enveloping, realistic sound ﬁeld that draws you into the ﬁlm or music program

without drawing your attention away from the action on the screen.

• For multichannel music recordings, some music producers will create a sound ﬁeld

that places the musicians all around you; others will create a sound ﬁeld that places

the musicians in front of you, with more subtle ambience in the surround speakers

(as you would experience in a concert hall).

• In most 5.1-channel and 7.1-channel ﬁlm soundtracks, the surround speakers are

not intended to be as loud or as active as the front speakers. Adjusting the surround

speakers so they are always as loud as the front speakers could make dialogue

difﬁcult to understand and will make some sound effects sound unrealistically loud.

Notes on Setting Subwoofer Volume:

• Sometimes the ideal subwoofer volume setting for music is too loud for ﬁlms, while

the ideal setting for ﬁlms is too quiet for music. When setting the subwoofer volume,

listen to both music and ﬁlms with strong bass content and ﬁnd a “middle ground”

volume level that works for both.

• If your subwoofer always seems too loud or too quiet, you may want to place it in

a different location. Placing the subwoofer in a corner will always tend to increase

its bass output, while placing it away from any walls or corners will always tend to

reduce its bass output.

AVR 1710S/AVR 171S only: Listening in Zone 2

With the multizone system in use, you may enjoy an exciting 5.1-channel home theater

presentation in the main listening area, while others listen to an entirely different source in

another room. See Install a Multizone System, on page 19, for installation information.

You set up and activate the AVR’s multizone system from the on-screen Zone 2 menu.

Press the OSD/Menu button, and navigate to the Zone 2 line. Press the OK button to

display the Zone 2 menu.

Status: This line lets you turn Zone 2 on or off.

Source: This line lets you select the source input for Zone 2. You may select a different

source from the one currently operating in the main listening area. However, if the same

source has been selected for both the main listening area and Zone 2, listeners in both

areas will hear the same content.

Only analog audio sources are available to Zone 2. To hear digital devices such as a CD

player in Zone 2, follow these steps:

1. In addition to making a digital audio connection, connect the source device’s analog

audio outputs to the AVR. Make a note in Table A5 on page 39 to record which set of

analog inputs you used.

2. Use the AVR’s front-panel Audio Input button to select the analog audio input. (Leave

the Audio setting for the source device in the Source Setup menu set to the digital

input.)

Notes about listening in Zone 2:

• Although you can listen to iPod or USB as a source in Zone 2, you cannot begin

iPod or USB playback from within Zone 2. You must initially select iPod or USB as a

source in Zone 1 and begin playback of a track or playlist from there. Then you can

select iPod as the Zone 2 source and control playback from within Zone 2 even if you

switch Zone 1 to a different source.

• Only one of the AVR’s internal sources (iPod, USB, vTuner, Network, AirPlay, DLNA

DMR) can be active at a time across both zones. For example, if you are listening

to vTuner as the source in Zone 1 and switch the source in Zone 2 to USB, it will

switch the source in Zone 1 to USB(and vice versa). To listen to different sources in

Zone 1 and Zone 2 at the same time, at least one source must be one of the AVR’s

conﬁgurable external sources (Cable/Sat, Disc, STB or TV) that is connected to one

of the AVR’s analog audio inputs, or one of the AVR’s terrestrial radio sources (FM

or AM).

Volume: Highlight this line, and use the Left/Right buttons to control the volume in Zone

Assigned AMP: This line lets you assign the Assigned AMP channels to “Zone 2” for

multizone operation (see Number of Speakers, on page 31). When this line is set to Zone

2, you may conﬁgure the main listening room for only up to 5.1 channels.

To use the remote to control the sound in Zone 2, press the remote’s Zone 2 button. The

volume, mute and source select buttons will control the sound in Zone 2 and the Zone 2

button will illuminate whenever you press a button to indicate that the remote is in the

Zone 2 control mode. Press the Zone 2 button again to return the remote to the main

listening area control mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR 1710S Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR 1710S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info