Bedienungsanleitung Harman Kardon AVR 171S (Seite 9 von 52) (Englisch)

599836

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

AVR

ENGLISH

System Remote Control Functions

System Remote Control Functions, continued

In addition to controlling the AVR, the AVR remote is capable of controlling eight other

devices, including an iPod/iPhone device connected to the AVR’s front-panel USB port.

During the installation process, you may program the codes for each of your source

components into the remote. (See Program the Remote to Control Your Source Devices

and TV, on page 21, for programming information.) To operate a component, press its

Source Selector button to change the remote’s control mode.

A button’s function depends on which component is being controlled. See Table A13 in

the Appendix for listings of the functions for each type of component. Most of the buttons

on the remote have dedicated functions, although the precise codes transmitted vary

depending on the speciﬁc device being controlled. Due to the wide variety of functions for

various source devices, we have included only a few of the most-often used functions on

the remote: number buttons, transport controls, television-channel control, menu access

and power on and off. Buttons dedicated to the AVR – AVR Power On/Off, Surround

Modes, Volume, Mute, Delay and Sleep Settings – are available at any time, even when

the remote is controlling another device.

Power On/Power Off buttons: Press these buttons to turn the AVR on and put it into

Sleep or turn it off. See Power Indicator/Power Button, on page 4, for more information.

IR Transmitter: As buttons are pressed on the remote, infrared codes are emitted

through this lens.

Zone 2 button (AVR 1710S/AVR 171S only): Use this button to select whether the AVR

commands will affect the main listening area (Zone 1) or the remote zone of a multizone

system (Zone 2). When the remote is in the Zone 2 control mode, the Zone 2 button will

illuminate whenever you press a button.

Mute button: Press this button to mute the AVR’s speaker-output connectors and

headphone jack. To restore the sound, press this button or adjust the volume.

Source Selector buttons: Press one of these buttons to select a source device, e.g.,

Disc, Cable/Sat, Radio, etc. This action will also turn on the AVR and switch the remote’s

control mode to operate the selected source device.

• The ﬁrst press of the Radio button switches the AVR to the last-used tuner band (AM

or FM). Each successive press changes the band.

• The ﬁrst press of the USB button switches the AVR to the last-used source (USB or

iPod). Each successive press cycles between the two sources.

• The ﬁrst press of the Network button switches the AVR to the last-used source

(Network or vTuner). Each successive press cycles between the two sources.

AVR button: Press to put the remote into the AVR control mode.

Surround Modes button: Press this button to access the Surround Modes submenu.

Select a surround-mode category: Auto Select, Virtual Surround, Stereo, HARMAN NSP,

Movie, Music or Game. When you select the category, it is highlighted and the surround

mode changes.

To change the surround mode for the selected category navigate to the Surround Mode

menu in the AVR’s on-screen display menu, select the desired category, and use the Left/

Right buttons to select one of the available surround modes. See the Advanced Functions

section, on page 29, for more information.

OSD/Menu button: When the remote is controlling the AVR, press this button to display

the AVR’s on-screen display (OSD) menu. This button is also used within the tuner menus

and an iPod connected to the AVR’s front-panel USB port, and is also used to display the

main menu on some source devices.

Up/Down/Left/Right buttons: These buttons are used to navigate the menu system and

to operate the tuner.

OK button: This button is used to select items from the menu system.

Back/Exit button: Press this button to return to the previous menu or to exit the menu

system.

Home button: Press this button to display the Home menu for a Roku Streaming Stick

™

that is connected to the AVR’s MHL/HDMI connector.

Number buttons: Use these buttons to enter numbers for radio-station frequencies or

to select station presets.

Clear button: Press this button to clear a radio station frequency you have started to

enter.

Test Tone button: Press this button to activate test noise that will circulate through each

speaker, allowing you to adjust the individual speaker levels. Use the Up/Down buttons

to switch the noise to a different speaker and use the Left/Right buttons to change the

volume of the speaker the noise is playing through.

Delay Adjust button: Pressing this button lets you adjust two different types of delay

settings (use the Up/Down buttons to cycle through the settings):

• Lip Sync: This setting lets you resynchronize the audio and video signals from a

source to eliminate a “lip sync” problem. Lip-sync issues can occur when the video

portion of a signal undergoes additional processing in either the source device or the

video display. Use the Left/Right buttons to delay the audio by up to 180ms.

• Distance: These settings let you set the delay for each speaker to compensate for the

different distances they may be from the listening position. Use the Up/Down buttons

to cycle through each of the system’s speakers, and use the Left/Right buttons to set

the distance each speaker is from the listening position. See Manual Speaker Setup,

on page 30, for more information.

Sleep button: Press this button to activate the sleep timer, which turns off the receiver

after a programmed period of time. Each press increases the time by 10 minutes, up to

90 minutes – ending with the “Sleep Off” message.

Volume Up/Down buttons: Press these buttons to raise or lower the volume.

Channel/Tuner buttons: When radio has been selected, press these buttons to select a

preset radio station. While operating a cable, satellite or HDTV set-top box or a television,

press these buttons to change channels.

Info/Option button: Press to display the available option settings for the current

source.

Display Dimmer button: Press this button to dim the AVR’s front-panel Message Display

partially or fully.

Preset Scan button: When Radio is the selected source, press this button to play each of

your preset radio stations in order for ﬁve seconds. Pressing the button again to remain

tuned to the current station.

RDS button (AVR 171S/AVR 161S only): When listening to an FM radio station that

broadcasts RDS information, this button activates the various RDS functions.

Direct button: Press this button to directly tune to a radio station by using the Number

buttons to enter its frequency.

Memory button: Press this button to save the current radio or vTuner station as a

preset.

Transport Control buttons: These buttons are used to control source devices.

Previous Channel button: When TV is the selected source, press this button to switch

to the previously-tuned channel.

Harman Kardon AVR 171S Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR 171S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info