Bedienungsanleitung Harman Kardon AVR 171S (Seite 26 von 52) (Englisch)

599836

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

AVR

Operating Your AVR

HARMAN NSP: A HARMAN proprietary technology, NSP uses sophisticated digital

processing to deliver a true natural sounding three-dimensional listening experience

from conventional 2-channel stereo sources like CDs and stereo broadcasts. While

preserving the recording’s original timbre and spatial balance, HARMAN NSP creates a

simulated listening space that automatically adjusts to suit the type of program you are

listening to.

The following adjustments are available:

• Stage Width: This adjustment allows you to widen or narrow the width of the apparent

listening space in front of you. For example, a higher setting would be appropriate for

a recording of an orchestra playing in a concert hall, while a lower setting would be

more appropriate for a recording of a singer playing an acoustic guitar.

• Stage Depth: This adjustment lets you control the total size of the apparent listening

space. A higher setting would approximate the acoustic qualities of larger listening

spaces, such as concert halls and arenas, while a lower setting would approximate

the acoustic qualities of smaller listening spaces like small clubs or coffee houses.

Movie: Select from the following when you want a surround mode for movie playback:

DTS Neo:6 Cinema or Dolby Pro Logic II (IIx or IIz when seven main speakers are present)

in the AVR 1710S/AVR 171S.

Music: Select from the following when you want a surround mode for music playback:

DTS Neo:6 Music or Dolby Pro Logic II (IIx or IIz when seven main speakers are present

in the AVR 1710S/AVR 171S). The Dolby Pro Logic II/IIx/IIz Music mode allows access to

a submenu with some additional settings. See Audio Processing and Surround Sound, on

page 29, for more information.

Game: Dolby Pro Logic II (IIx/IIz when seven main speakers are present) Game is available

for video game playback..

After you have made your selection, press the Back/Exit button.

You can also change surround mode categories by repeatedly pressing the Surround

Mode button on either the remote or the front panel.

• You can change surround modes within surround mode categories by pressing the

Surround Mode Select buttons on the front panel.

See Audio Processing and Surround Sound, on page 29, for more information on surround

modes.

Listening to FM and AM Radio

Select the Radio source. A screen similar to the one in the illustration below will appear.

Use the Up/Down buttons or the Remote’s Channel buttons to tune a station as displayed

on the front panel and on-screen display.

The AVR defaults to automatic tuning, meaning each press of the Up/Down buttons scans

up or down the frequency band until a station with acceptable signal strength is found.

To switch to manual tuning, in which each press of the Up/Down buttons steps through

a single tuning frequency increment, press the Tuning Mode button on the front panel or

press and hold the OK button on the remote control for more than 3 seconds. Each press

of the button toggles between automatic and manual tuning modes.

Once you have tuned an FM station, toggling the Mode setting also switches the radio

between stereo and monaural reception. (Mono reception may improve reception of

weaker stations.) Note that some surround modes are not available with monaural

reception.

Preset Stations

You can store a total of 30 stations (AM and FM combined) as presets. When you want to

save the currently tuned station as a preset, press the remote’s Memory button. Use the

Number buttons to enter the desired preset number.

To tune to a preset station:

• Press the Left/Right buttons.

• Press the remote’s Preset Scan button. The AVR will tune to each preset station

in order for ﬁve seconds. When the desired preset is tuned, press the Preset Scan

button again.

• Enter the preset number using the Number buttons. For presets 10 through 30, press

0 before the preset number. For example, to enter preset 21, press 0-2-1.

Auto Store is an alternate method for storing presets automatically. When you select Auto

Store, your AVR will scan for any frequencies with good signal and save them as presets

automatically. To use Auto Store:

• In either FM or AM source, press the Info/Option button on the AVR’s remote

control.

• Press OK to select “Auto Store.”

• Highlight “Yes” and press “OK.”

Your AVR may take several minutes to complete the Auto Store process. Note that

performing Auto Store will erase all currently saved preset station.

Listening to Media on a USB Device

Your AVR is compatible with MP3 and WMA media.

MP3 compatibility: Mono or stereo, contstant bit rates (CBR) from 8kbps to 320kbps,

variable bit rates (VBR) from lowest to highest quality, with sample rates from 8kHz –

48kHz.

WMA compatibility: Ver. 9.2 basic, stereo CBR with 32kHz – 48kHz sampling rate and

40kbps – 192kbps bit rate, mono CBR with 8kHz – 16kHz sampling rate and 5kbps –

16kbps bit rate, VBR Pass Encoding and Quality Encoding 10 – 98, 44kHz and 48kHz

sampling rate.

No other types of media are supported.

Playing files on a USB device

1. Insert the USB drive into the AVR’s front-panel USB port.

IMPORTANT: Do not connect a personal computer or peripheral to the USB port. USB

hubs and multi-card readers are not supported.

2. Press the USB source selector button on the remote until the front-panel display’s

“USB” as the source. The USB screen will appear.

3. Select a folder and press the OK button. The AVR will list all compatible audio ﬁles.

Harman Kardon AVR 171S Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR 171S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info