Bedienungsanleitung Harman Kardon AVR 265 (Seite 34 von 62) (Englisch)

502603

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

AVR

Advanced Functions

Audio Effects Button

To adjust other audio settings, such as the tone controls, press the Audio Effects button

to display the Audio Effects menu. You can also access the menu by pressing the Info

button and selecting Audio Effects.

Audio Effects – Cable/Sat

Dolby Volume:

PLIIz Height Gain:

Edit: Dolby PLII Music

Edit: Dolby PLIIx Music

Medium

Low

Off

Tone Control:

Treble:

Bass:

LFE Tr im:

MP3 Enhancer

EZSET/EQ:

NOTE: Each source has its own independent Audio Effects settings.

Dolby Volume: See

Dolby Volume

, on page 28, for an explanation of Dolby Volume

processing and its beneﬁts. Refer to the table on that page for an explanation of each of

the Dolby Volume settings.

PLIIz Height Gain: When you have set the Assigned Amp to Front Height (see

Manual

Speaker Setup

, on page 36), the PLIIz Height Gain setting will become available. The front

height channels can greatly improve the spatial experience of a surround-sound system.

Some listeners may want the depth and dimension that height channels provide, but

from a seemingly transparent experience. Other listeners may prefer to accentuate the

front height channels by using a higher volume setting.

The PLIIz Height Gain control gives you the ability to change the volume of the front

height channels to suit different programs. The control has three settings: Low (normal

volume), Mid (moderate volume increase) and High (maximum volume increase). Note

that you can also ﬁne-tune the front height channel volume levels. See

Setting Channel

Output Levels Manually

, on page 38, for details.

Edit Dolby PLII/Dolby PLIIx Music: Some additional settings are available for the Dolby

Pro Logic II modes. When the Dolby Pro Logic II or IIx Music modes have been selected,

choose the “Edit Dolby PLII/IIx Music” submenus to adjust the Center Width, Dimension

and Panorama settings.

Edit: Dolby PLIIx Music

Center Width

Dimension

Panorama

Exit

Off

Center Width: This setting affects how vocals sound through the three front speakers.

A lower number focuses the vocal information tightly on the center channel. Higher

numbers (up to 7) broaden the vocal soundstage. Use the Left/Right buttons to adjust.

Dimension: This setting affects the depth of the surround presentation, allowing you to

“move” the sound toward the front or rear of the room. The setting of “0” is a neutral

default. Setting “F-3” moves the sound toward the front of the room, while setting “R-3”

moves the sound toward the rear. Use the Left/Right buttons to adjust it.

Panorama: With the Panorama mode turned on, some of the sound from the front

speakers is moved to the surround speakers, creating an enveloping “wraparound”

effect. Each press of the OK button toggles the setting On or Off.

Tone Control: This setting determines whether the treble and bass controls are active.

When it’s set to Off, the tone controls are out of the circuit, with no changes to the sound.

When it’s set to On, the bass and treble controls are in the circuit.

Treble/Bass: These settings boost or cut the treble or bass frequencies by up to 10dB.

Use the Left/Right buttons to change the setting. The default setting is 0dB, at the center

of the bar.

LFE Trim: This setting attenuates the loudness of the LFE signal to the subwoofer. The

setting defaults to the maximum of 0dB. Press the Left/Right buttons to reduce the

level by up to 10dB; the setting will appear as a negative number. NOTE: This setting is

effective only when a dedicated LFE-channel signal is present in the source material.

MP3 Enhancer: This setting enhances the frequency range of MP3 audio tracks. Select

On, or leave the enhancer at the default Off setting when you’re listening to non-MP3

audio.

EZ Set/EQ: This setting activates or deactivates the equalization settings obtained

when the EzSet/EQ II process was run. The settings are saved for reactivation at a later

listening session.

When you have ﬁnished making adjustments, press the Audio Effects button or the Back/

Exit button.

Video Processing

Your AVR uses leading-edge Faroudja DCDi Cinema

™

video-processing technology.

Incoming video signals may be upscaled up to 1080p for outstanding video quality, even

with analog video sources. The Faroudja DCDi Cinema Dual 3D comb ﬁlters and 10-bit

video processing eliminate the jagged edges and moiré patterns seen with less advanced

processing. The AVR’s “Torino” video-processing circuitry generates on-screen graphics

in high deﬁnition and blends them with the incoming video so that you can continue to

watch a program while using the AVR’s system menus.

The AVR’s video processor automatically provides the best picture based on the

capabilities of your video display and the incoming source video. You may experiment

with the Video Modes menu adjustments to try to improve the picture further.

Adjust your video display’s picture settings before adjusting the AVR’s Video Modes

settings. Access the picture settings from the Video Modes menu. Press the Video Modes

button, and the Video Modes screen will appear. You can also access the menu by

pressing the Info button and selecting Video Modes.

Video Modes – Blu-ray

Video Mode:

Picture Adjust:

Overscan:

Advanced Video Settings

Movie

Auto Fit

Off

NOTE: Each source has its own independent Video Modes settings.

Video Mode: The default setting of Off passes the video signal through to the display

with only basic video processing. (NOTE: Video scaling cannot be turned off, but selecting

the HDMI Bypass mode in the Info menu for a source connected to one of the HDMI Input

connectors passes the video signal directly from the HDMI input connector to the HDMI

Monitor Out connector, bypassing all video processing.)

Select one of these processing options to optimize the picture for the current program by

applying adjustments to the brightness, contrast, color and sharpness:

Sports: For sporting events. •

Nature: For programs shot outdoors, in a natural setting. •

Movie: For movies and many television broadcasts. •

Custom: Lets you adjust the picture settings manually. The Brightness, Contrast, Color •

and Sharpness settings will appear as sliders with values ranging from 0 to 100.

The default setting for each adjustment is 50. Use the Left/Right buttons to change

each setting’s value. See

How to Adjust the Custom Picture Settings

, on page 35, for

detailed information about making these adjustments.

Picture Adjust: This setting changes the aspect ratio (width:height ratio) of the displayed

image. Widescreen (16:9) images are displayed on a full-screen (4:3) video display in

letterbox format. Black bars may appear above and below the image.

When full-screen images appear on a widescreen video display, black or gray bars may

appear to the left and right of the image (pillarboxing).

0295CSK - HK (x65Series) AVR3650_365_2650_265 CORE OM, WORK18 danny.indd 34 01/07/11 11:34:05

Harman Kardon AVR 265 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR 265

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info