ENGLISH
AV
Rear
7
Rear
Radio Antenna connectors: Connect the supplied
respective terminals for radio reception.
Wi-Fi
®
Antenna connector (AVR 3700/AVR 370): If your home network is
connect the supplied
®
-
compatible devices that are connected to the network.
network connection.
Network connector: If your home network is wired,
cable (not supplied) to connect the
enjoy Internet radio and content from DLNA-compatible devices that are connected to the
network.Connect to Y on pa
HDMI
®
Input connectors:
between devices.
the best possible video and audio performance quality
both digital video and digital audio signals,
connections for devices you connect via the HDMI connection.Connect Y
and on page 18, for more information.
HDMI Output connectors: If your
included) to connect it to the
transcode component and composite video input signals to the HDMI format (upscaling
to as high as 1080p),
the NO The AVR 3700
and
Notes on using the HDMI Output connector:
• When connecting a DVI-equipped display to the HDMI Out connector
HDMI-to-DVI adapter and make a separate audio connection.
• Make sure the HDMI-equipped display is HDCP (High-bandwidth Digital Content
Protection)-compliant.
analog video connection instead and make a separate audio connection.
Analog Video connectors: The following
• Composite Video Input connectors: Use composite video connectors for video
source devices that don’t have HDMI or component video connectors.
need to make an audio connection from the source device to the Connect
Y on page 18,
• Component Video Input connectors: If any of your video source devices have
component video connectors (and do not have HDMI connectors), using the
component video connectors will provide superior video performance.
need to make an audio connection from the device to the receiverConnect Y
Audio and on page 18, for more information.
• Composite Video Monitor Out connector: If your
have an HDMI connector
AVR’
NOTE: The HDMI connection to your
connection to your
Analog Audio connectors:
• Analog Audio Input connectors: Use the
source devices that don’t have HDMI or digital audio connectors. See Connect Y
Audio and on page 18, for more information.
• Analog Rec[ord] Out connectors: Connect this analog audio output to the analog
audio input of a recording device.
analog audio source is playing.
• Zone 2 Out connectors: Connect these jacks to an external amplifier to power the
speakers in the remote zone of a multizone system.
Pre-Out connectors (AVR 3700/AVR 370): Connect these jacks to external amplifiers if
more power is desired.
is determined by the setting you make for the Manual Speaker Setup:
Number of Speakers,on page 38, for more information.
Subwoofer connector: Connect this jack to a powered subwoofer with a line-level input.
See Connect on page 17,
AVR 370 have two subwoofer connectors.
IR and TThe following IR and trigger connectors are provided:
• IR Remote In/Out connectors:
(such as when the
to the IR Remote In jack.
a compatible product to enable remote control through the A
• Zone 2 IR Input connector: Connect a remote IR receiver located in Zone 2 of a
multizone system to this jack to control the
to the Remote IR Output connector) from the remote zone.
• 12V TThis connector provides 12V DC whenever the A
can be used to turn on and off other devices such as a powered subwoofer
Speaker connectors: Use two-conductor speaker wire to connect each set of terminals
to the correct speakerConnect Y on page 17,
NOTE:
channels in a 7.1- channel home theater
for multizone operation or to front height channels for Dolby
®
Pro Logic IIz operation.
See Place Y,
Digital Audio connectors: If your non-HDMI source devices have digital outputs,
connect them to the
connection (HDMI,Connect Y
Source Devices,on page 18, for more information.
RS-232 connector: This connector is used to connect to external control hardware.
Consult a certified professional installer for more information.
Fan VThese vents are used by the
clearance of at least three inches (75mm) from the nearest surface to avoid overheating
the unit.
temperature sensor turns the fan on only when it is needed.
IMPORT
overheat to dangerous levels.
Main Power switch: This mechanical switch turns the
usually left on,
AC Input connector:
supplied unswitched wall outlet.
