Bedienungsanleitung Harman Kardon AVR 347 (Seite 21 von 76) (Englisch)

502541

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

Analog Audio

Analog connections require two cables, one for the left channel (white)

and one for the right channel (red). These two cables are often attached

to each other for most of their length. See Figure 7.

Most sources that have digital audio jacks also have analog audio jacks,

although some older types of sources, such as tape decks, have only

analog jacks. For sources that are capable of both digital and analog

audio, you may wish to make both connections.

The analog audio connection is strongly recommended if you intend to

use the source with the multiroom system. It’s required if you will be

using the multiroom preamp outputs with an external amplifier to power

your remote speakers, as the AVR 347’s multiroom system is not capa-

ble of converting the digital signal to analog format. It’s suggested that

you also use the analog audio connections when using the surround

back/multiroom speaker outputs, in case another two-channel digital

audio source is in use in the main listening area. The AVR 347 is only

capable of processing one PCM source at a time.

If you wish to record materials from DVDs or other copy-protected

sources, you may only do so using analog connections. Remember to

comply with all copyright laws, if you choose to make a copy for your

own personal use.

Figure 7 – Analog Audio

Multichannel analog connections are used with some high-definition

sources where the copy-protected digital content is decoded inside the

source. These types of connections are usually used with DVD-Audio,

SACD, Blu-ray Disc, HD-DVD and other multichannel players. See Figure 8.

However, the multichannel analog audio connection is not required for

DVD-Audio players compliant with HDMI version 1.1 or better, or HD-DVD

and Blu-ray Disc players that decode the digital audio internally and

output linear PCM signals in digital format. Consult the owner’s guide

for your disc player for more information.

Figure 8 – Multichannel Analog Audio

Harman Kardon receivers also include a proprietary, dedicated audio

connection called “The Bridge/DMP”. If you own an iPod with a dock

connector, you may separately purchase The Bridge and connect it to

The Bridge/DMP port on the receiver. See Figure 9. Dock your iPod

(not included) in The Bridge, and you may listen to your audio materials

through your high-performance audio system. If your iPod is photo-

or video-capable, you may view still images or video materials stored

on the iPod using your home theater system. You may even use the

AVR 347 remote to control the iPod, with navigation messages displayed

on the front panel and on a video display connected to the AVR. The

Bridge outputs analog audio to the AVR 347, and it is available to the

multiroom system.

Figure 9 – The Bridge

Video Connections

Although some sources produce an audio signal only (e.g., CD player,

tape deck), many sources output both audio and video signals (e.g.,

DVD player, cable television box, HDTV tuner, satellite box, VCR, DVR).

In addition to the audio connection, you will need to connect one type

of video connection for each source (never more than one at the same

time for any source).

Digital Video

If you have already connected a source device to one of the HDMI

inputs as explained in the Digital Audio Connections section, then you

have automatically made a video connection at the same time, as the

HDMI signal includes both digital audio and video components.

If the source device is not capable of transmitting its digital audio signal

through the HDMI connection, then use one of the coaxial or optical

digital audio inputs for the source.

If a multichannel analog audio connection is required for certain lossless

formats (e.g., DVD-Audio, SACD, HD-DVD or Blu-ray Disc), you may

make both audio connections, but you must also make an analog video

connection. To listen to the multichannel disc, first select the analog

video source input, then select the 6-/8-channel analog audio inputs, and

the AVR will retain the last video source you selected other than HDMI.

The AVR 347 is Simplay HD-verified for compatibility via the HDMI

connection with other Simplay HD-verified products.

Figure 4 (repeated) – HDMI Connection

Analog Video

There are three types of analog video connections: composite video,

S-video and component video. Composite video is the basic connection

most commonly available. The jack is usually color-coded yellow, and

looks like an analog audio jack, although it is important never to confuse

the two. Do not plug a composite video cable into an analog or coaxial

digital audio jack, or vice versa. Both the chrominance (color) and

luminance (intensity) components of the video signal are transmitted

using a single cable. See Figure 10.

Figure 10 – Composite Video

S-video, or “separate” video, transmits the chrominance and luminance

components using separate wires contained within a single cable. The

Composite

video cable

Multichannel

analog audio

cable (RCA)

Front Surround Center

Subwoofer

Analog audio

cable (RCA)

CONNECTIONS

AVR347 om.qxd 7/10/07 11:01 AM Page 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR 347 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR 347

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info