Bedienungsanleitung Harman Kardon AVR 3650 (Seite 9 von 62) (Englisch)

502600

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

AVR

ENGLISH

System Remote Control Functions, continued

In addition to controlling the AVR, the AVR remote is capable of controlling eight other

devices, including an iPod/iPhone device docked in a The Bridge IIIP docking station

connected to the AVR. During the installation process, you may program the codes for

each of your source components into the remote. (See

Program the Remote to Control

Your Source Devices and TV

, on page 23, for programming information.) To operate

a component, press its Source Selector button to change the remote’s control mode.

A button’s function depends on which component is being controlled. See Table A13

in the Appendix for listings of the functions for each type of component. Most of

the buttons on the remote have dedicated functions, although the precise codes

transmitted vary depending on the speciﬁc device being controlled. Due to the wide

variety of functions for various source devices, we have included only a few of the

most-often used functions on the remote: alphanumeric keys, transport controls,

television-channel control, menu access and power on and off. Buttons dedicated to

the AVR – AVR Power On/Off, Audio Effects, Video Modes, Surround Modes, Volume,

Mute and Sleep Settings – are available at any time, even when the remote is

controlling another device. To return the remote to the AVR control mode at any time,

press the Setup button.

AVR Power On/Off buttons: Press these buttons to turn the AVR on and off. The Main

Power switch on the AVR’s rear panel must be on for this button to work.

IR Transmitter Lens: As buttons are pressed on the remote, infrared codes are

emitted through this lens.

Device Power On/Off buttons: Press a device’s Source Selector button, then press

these buttons to turn the device on and off.

Source Selector buttons: Press one of these buttons to select a source device, e.g.,

Blu-ray, Cable/Sat, Radio, etc. This action will also turn on the AVR and switch the

remote’s control mode to operate the selected source device. NOTE: The ﬁrst press of

the Radio Source Selector button switches the AVR to the last-used tuner band (AM,

FM or SIRIUS). Each successive press changes the band.

Audio Effects button: Press this button to access the Audio Effects submenu, which

allows adjustment of the AVR’s tone and other audio controls. See the

Set Up Your

Sources

section, on page 26, for more information.

Video Modes button: Press this button for direct access to the Video Modes

submenu, which contains picture adjustments you can use after you have adjusted

the picture settings on your TV or video display. See the

Advanced Functions

section,

on page 33, for more information.

Surround Modes button: Press this button to access the Surround Modes submenu.

Select a surround-mode category: Auto Select, Virtual Surround, Stereo, Movie, Music

or Game. When you select the category, it is highlighted and the surround mode

changes.

To change the surround mode for the selected category, press the OK button when the

menu line is highlighted and use the Up/Down buttons to select one of the available

surround-mode options. Press the OK button; or press the Back/Exit button to exit the

Surround Modes menu and display the next higher menu in the hierarchy. See the

Advanced Functions

section, on page 33, for more information.

Number buttons: Use these buttons to enter numbers for radio-station frequencies

or to select station presets.

Last Channel button: When controlling a cable, satellite or HDTV set-top box or a TV,

press this button to return to the previous television channel.

Activity button: With this button you can program the remote to store up to 11

different Macros (Activities). (A Macro is a series of commands that are transmitted

by a single button press.) Execute a Macro by pressing this button, followed by the

Number button (or the AVR Power On button) into which you programmed the Macro.

See

Programming Macro (Activity) Commands

, on page 41, for more information.

Back/Exit button: Press this button to return to the previous menu or to exit the

menu system.

Menu button: This button is used within the tuner menus (including SIRIUS Radio)

and The Bridge IIIP control menu, and is also used to display the main menu on some

source devices. To display the AVR’s menu system, press the Setup button.

Up/Down/Left/Right buttons: These buttons are used to navigate the menu system

and to operate the tuner.

OK button: This button is used to select items from the menu system.

Backlight button (AVR 3650/AVR 365 only): Press this button to illuminate the

buttons on the remote. Press it again to turn the backlight off, or wait 5 seconds after

the last button press for the light to turn off on its own.

Disc Menu button: To display the disc’s menu while a DVD or Blu-ray Disc is playing,

press the Blu-ray Source Selector button, then press this button.

A/B/C/D buttons: These buttons can be used as additional source buttons and can

also operate certain functions when used with some source devices. See Table A13

in the Appendix for details. These buttons are also used with a Teletext

-capable

television if your broadcast, cable or satellite provider offers Teletext service.

Volume Up/Down buttons: Press these buttons to raise or lower the volume.

Channel Up/Down and Page buttons: When the tuner has been selected, press

these buttons to select a preset radio station. While operating a cable, satellite or

HDTV set-top box or a television, press these buttons to change channels.

Mute button: Press this button to mute the AVR’s speaker-output connectors and

headphone jack. To restore the sound, press this button or adjust the volume.

Transport Control buttons: These buttons are used to control source devices and

The Bridge IIIP.

Info button: Press to display the AVR’s Info Menu, which contains the settings for

the current source.

Setup button: Press to display the AVR’s Main Menu or to switch the remote to the

AVR control mode.

Sleep button: Press this button to activate the sleep timer, which turns off the

receiver after a programmed period of time. Each press increases the time by 10

minutes, up to 90 minutes – ending with the “Sleep Off” message.

Learn button (AVR 3650/AVR 365 only): The AVR 3650/AVR 365 remote is capable

of “learning” individual IR codes from the original remote that came with a source

device. See

Program the Remote to Control Your Source Devices and TV

, on page 23,

for more information.

Zone Selector switch: Use this switch to select whether the AVR commands will

affect the main listening area (Zone 1) or the remote zone of a multizone system

(Zone 2). For normal operation, leave the switch in the Zone 1 position.

0295CSK - HK (x65Series) AVR3650_365_2650_265 CORE OM, WORK18 danny.indd 9 01/07/11 11:33:31

Harman Kardon AVR 3650 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR 3650

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info